BP120
BP120
BP120
Ni-Cd Rechargeable Battery Pack
Ni-Cd Rechargeable Battery Pack
Ni-Cd Rechargeable Battery Pack
Instruction Sheet
Instruction Sheet
Instruction Sheet
This Rechargeable Battery Pack is designed for use
with the Fluke ScopeMeter Model 123 and the Fluke
Power Quality Analyzer Model 43(B).
This Rechargeable Battery Pack is designed for use
with the Fluke ScopeMeter Model 123 and the Fluke
Power Quality Analyzer Model 43(B).
This Rechargeable Battery Pack is designed for use
with the Fluke ScopeMeter Model 123 and the Fluke
Power Quality Analyzer Model 43(B).
Chapter 2 of the Users Manuals for Model 123 and
for Model 43(B) explain how to exchange the Battery
Pack.
Chapter 2 of the Users Manuals for Model 123 and
for Model 43(B) explain how to exchange the Battery
Pack.
Chapter 2 of the Users Manuals for Model 123 and
for Model 43(B) explain how to exchange the Battery
Pack.
After installation, charge the Battery Pack for at least
5 Hrs. with the ScopeMeter or Power Quality
Analyzer switched off.
After installation, charge the Battery Pack for at least
5 Hrs. with the ScopeMeter or Power Quality
Analyzer switched off.
After installation, charge the Battery Pack for at least
5 Hrs. with the ScopeMeter or Power Quality
Analyzer switched off.
•
•
•
Nominal Voltage: 4.8 V
Capacity: 2.0 Ah
Lifetime: minimum 500 cycles at nominal charge
of 500 mA
•
•
•
Nominal Voltage: 4.8 V
Capacity: 2.0 Ah
Lifetime: minimum 500 cycles at nominal charge
of 500 mA
•
•
•
Nominal Voltage: 4.8 V
Capacity: 2.0 Ah
Lifetime: minimum 500 cycles at nominal charge
of 500 mA
•
Temperature Ranges:
•
Temperature Ranges:
•
Temperature Ranges:
Operating: 0 °C to 50°C
Quick Charging: 10°C to 40°C
Trickle Charging: 10°C to 45°C
Storage: -40°C to 60°C
Operating: 0 °C to 50°C
Quick Charging: 10°C to 40°C
Trickle Charging: 10°C to 45°C
Storage: -40°C to 60°C
Operating: 0 °C to 50°C
Quick Charging: 10°C to 40°C
Trickle Charging: 10°C to 45°C
Storage: -40°C to 60°C
Performing a Refresh Cycle every 3 months, will
contribute to the lifetime of the Battery Pack.
Performing a Refresh Cycle every 3 months, will
contribute to the lifetime of the Battery Pack.
Performing a Refresh Cycle every 3 months, will
contribute to the lifetime of the Battery Pack.
To prevent damage to Equipment or Battery:
Fully charge before use.
To prevent damage to Equipment or Battery:
Fully charge before use.
To prevent damage to Equipment or Battery:
Fully charge before use.
Keep the battery cool
Keep the battery cool
Keep the battery cool
Do not dispose in open fire
Observe polarity
Do not dispose in open fire
Observe polarity
Do not dispose in open fire
Observe polarity
Do not solder directly to the cells
Do not short circuit
Do not solder directly to the cells
Do not short circuit
Do not solder directly to the cells
Do not short circuit
Store Batteries outside the Instrument
Store Batteries outside the Instrument
Store Batteries outside the Instrument
|
AKG Acoustics Battery Charger CU4000 User Manual
Epson Stylus Photo RX600 User Manual
Friedrich US12B10A User Manual
Friedrich WallMaster PACKAGED TERMINAL AIR CONDITIONERS AND HEAT PUMPS User Manual
Frigidaire FRA084KT7 User Manual
Fujitsu Air Conditioner AOU18D User Manual
Fujitsu VM2200 User Manual
GE CLIMATISEUR AEM18_ User Manual
Goodman Mfg 000 BTUH + 115 Volt User Manual
Heat Controller Inc Air Conditioner BDE 103 User Manual