All in One Product
All rights reserved. No part of this publication may be reproduced, stored in a retrieval All
rights reserved. No part of this publication may be reproduced, stored in a retrieval system,
or transmitted in any form or by any means, electronic, mechanical, photocopying, recording,
or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The
information contained herein is designed only for use with this product. EPSON is not
responsible for any use of this information as applied to other printers.
Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of
this product or third parties for damages, losses, costs, or expenses incurred by the purchaser
or third parties as a result of accident, misuse, or abuse of this product or unauthorized
modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly
comply with SEIKO EPSON CORPORATION's operating and maintenance instructions.
SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from
the use of any options or any consumable products other than those designated as Original
EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION.
SEIKO EPSON CORPORATION shall not be held liable for any damage resulting from
electromagnetic interference that occurs from the use of any interface cables other than those
designated as EPSON Approved Products by SEIKO EPSON CORPORATION.
®
EPSON is a registered trademark and EPSON Stylus™ is a trademark of SEIKO EPSON
CORPORATION.
Copyright 2001 SEIKO EPSON CORPORATION. All rights reserved. PRINT Image
Matching™ is a trademark of SEIKO EPSON CORPORATION. The PRINT Image Matching
logo is a trademark of SEIKO EPSON CORPORATION.
Copyright 2002 SEIKO EPSON CORPORATION. All rights reserved. USB DIRECT-PRINT
is a trademark of SEIKO EPSON CORPORATION. The USB DIRECT-PRINT logo is a
trademark of SEIKO EPSON CORPORATION.
®
®
Microsoft and Windows are registered trademarks of Microsoft Corporation.
®
®
Apple and Macintosh are registered trademarks of Apple Computer, Inc.
DPOF™ is a trademark of CANON INC., Eastman Kodak Company, Fuji Photo Film Co.,
Ltd. and Matsushita Electric Industrial Co., Ltd.
SD™ is a trademark.
Memory Stick,
Sony Corporation.
, Memory Stick PRO, and
are trademarks of
xD-Picture Card™ is a trademarks of Fuji Photo Film Co.,Ltd.
General Notice:Otherproduct namesused herein are for identification purposes only and may
be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.
Copyright © 2003 by SEIKO EPSON CORPORATION, Nagano, Japan.
Basic Operation Guide
3
Contents
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Control Panel Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
LCD panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Changing Copy Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Canceling Copying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
4
Loading Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Canceling Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Checking the Ink Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Cleaning the Print Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Transporting This Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
5
Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Memory Card Caught Between the Memory Card Slot and
Product Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Mechanical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Scanning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
6
Safety Instructions
Safety Instructions
Read all of the instructions in this section when setting up and using
this product.
When placing this product
❏
Avoid places subject to rapid changes in temperature and
humidity. Also, keep this product away from direct sunlight,
strong light, and heat sources.
❏
❏
Avoid places subject to dust, shocks, and vibrations.
Leave enough room around this product for sufficient
ventilation.
❏
❏
Place this product near a wall outlet where you can easily plug
in and unplug this product.
Place this product on a flat, stable surface that extends beyond
this product base in all directions. If you place this product by
the wall, leave more than 10 cm between the back of this product
and the wall. This product will not operate properly if it is tilted
at an angle.
❏
When storing or transporting this product, do not tilt it, stand it
on its side, or turn it upside down; otherwise, ink may leak from
the cartridge.
Safety Instructions
7
When choosing a power source
❏
❏
❏
❏
Use only the type of power source indicated on the label on the
back of this product.
Use only the power cord that comes with this product. Use of
another cord may cause fire or electric shock.
This product’s power cord is for use with this product only. Use
with other equipment may cause fire or electric shock.
Be sure your AC power cord meets the relevant local safety
standards.
❏
❏
Do not use a damaged or frayed power cord.
If you use an extension cord with this product, make sure that
the total ampere rating of the devices plugged into the extension
cord does not exceed the cord’s ampere rating. Also, make sure
that the total ampere rating of all devices plugged into the wall
outlet does not exceed the wall outlet’s ampere rating.
❏
If you plan to use this product in Germany, the building
installation must be protected by a 10 or 16 amp circuit breaker
to provide adequate short-circuit protection and over-current
protection for this product.
When using a memory card
❏
❏
❏
Do not remove the memory card or turn off this product while
the computer and the memory card are communicating (when
the memory card light is flashing).
The methods for using memory cards vary according to card
type. Be sure to refer to the documentation packaged with your
memory card for details.
Use only memory cards compatible with this product. Refer to
8
Safety Instructions
When handling ink cartridges
❏
❏
❏
❏
❏
❏
Do not open the ink cartridge packages until just before you
install them.
When installing the new ink cartridge, shake it four to five times
before opening its package.
Do not shake the ink cartridge after removing from the package;
this can cause leakage.
Be careful not to break the hooks on the side of the ink cartridge
when you remove it from its package.
Keep the ink cartridge out of the reach of children. Do not allow
children to handle it, or drink ink.
Be careful when you handle used ink cartridges, as there may be
some ink remaining around the ink supply port. If ink gets on
your skin, wash the area thoroughly with soap and water. If ink
gets into your eyes, flush them immediately with water. If
discomfort or vision problems remain after a thorough flushing,
see a doctor immediately.
❏
Do not touch the green IC chip on the side of the cartridge. This
can damage the ink cartridge.
Do not touch the circled parts.
❏
Do not remove or tear the label on the cartridge; otherwise, ink
will leak.
Safety Instructions
9
When using this product
❏
Do not put your hand inside this product or touch the ink
cartridges during printing.
❏
❏
❏
Do not block or cover the openings on this product.
Do not attempt to service this product by yourself.
Unplug this product and refer servicing to qualified service
personnel under the following conditions:
The power cord or plug is damaged; liquid has entered into this
product; this product has been dropped or the cover damaged;
this product does not operate normally or exhibits a distinct
change in performance.
❏
❏
❏
Do not insert objects into the slots on this product.
Never spill liquid on this product.
Do not leave this product with the ink cartridges uninstalled. If
it has been left with ink cartridges uninstalled for a long time, the
inkremainingin theprintheadnozzle drysout;thisproductmay
becomes unable to print.
When using the LCD panel
❏
Only use a dry, soft cloth to clean the display. Do not use liquid
or chemical cleansers.
❏
❏
If the display on this product is damaged, contact your dealer.
If the liquid crystal solution contained in the LCD panel leaks out
and gets on your hands, wash them thoroughly with soap and
water, iftheliquidcrystal solutiongetsinto youreyes, flush them
immediately with water, if discomfort or vision problems remain
after a thorough flushing, see a doctor immediately.
10
Safety Instructions
Using the Control Panel
Control Panel Functions
LCD panel
The LCD panel shows the current status of this product and helps
you make various settings. The upper left area of the LCD panel
shows the result of pressing the A button, the upper right for the B,
the lower left for the C, and the lower right for the D button. When
you turn on this product, it enters the mode selected the last time this
product was turned off. The example below shows the state when
this product is in the Copy Mode.
Paper type
Reduce/Enlarge
A
C
B
100%
Plain
Text
A4
01
D
Paper size
Print quality
Number of copies
You can also check the error messages on the LCD panel. For details
12
Using the Control Panel
Buttons
Buttons
Function
P On
Turns this product on and off.
Enters the Copy Mode.
Enters the Card Print Mode.
Copy Mode
Card Print
Mode
Scan Mode
Setup Mode
Enters the Scan Mode.
Enters the Setup Mode.
l Select/
Moves to the previous option.
When this product is in the Copy Mode, the current setting
is saved by pressing and holding this button for 3 seconds.
Save 3sec.
r Select/
Moves to the next setting.
Recall 3sec.
When this product is in the Copy Mode, the saved setting
is recalled by pressing and holding this button for 3
seconds.
Clear/
Clears the setting you have entered.
Reset 3sec.
Resets the number of copies to one.
Resets the values to their defaults when a menu item
appears on the LCD panel.
When you press and hold this button for 3 seconds, all of
the settings are reset to their defaults.
Menu
OK
Displays menu items for detailed settings on the LCD panel.
Enters the settings you have selected.
Copies or prints in grayscale.
x B&W
x Color
Copies or prints in color.
Starts scanning or the operation you have selected.
y Stop
Stops copying or scanning. The sheet being copied is
ejected.
Returns to the basic display when a menu item appears
on the LCD panel.
A, B, C, D
Used for making various settings.
When a button lights up, this shows the button is valid.
Numeric
buttons
Enter values (e.g. number of copies, enlargement ratio,
etc.).
Using the Control Panel
13
Lights
Light
Pattern
Status
! Error
On
An error occurs. (For details, see
Mode
On
On
Shows the mode this product is in.
Indicates the button is valid.
(Copy,
Card Print,
Scan, Setup)
A, B, C, D
Adjusting the LCD panel density
You can adjust the density of the LCD panel as follows.
1. Press the P On button to turn on this product.
2. Press the Setup Mode button to enter the Setup Mode.
3. Press the A or the l/r Select button repeatedly until 8.LCD
Contrast appears on the LCD panel, and then press the x Color
button. The LCD panel is shown below.
A
C
B
LCD Contrast
l - ononon + r
D
4. Adjust the density of the LCD panel. Press the C button to make
the panel lighter, or the D button to make it darker.
5. When the adjustment is finished, press the OK button.
14
Using the Control Panel
Copying
This section describes how to make copies using the control panel.
For information on making copies using a computer, see the Reference
Guide.
Note:
When you make a copy using a control panel function, a moiré (cross-hatch)
pattern may appear on your printout. To eliminate the moiré, change the
reduce/enlarge ratio or shift the position of the original document.
Overview of the Basic Procedure
The instructions below provide an example on how to make copies
in the Copy Mode.
1. Press the P On button to turn on this product.
2. Press the Copy Mode button to enter the Copy Mode. The LCD
panel shows the current copy settings, as indicated below.
A
C
B
100%
A4
Plain
Text
01
D
original document (see “Placing a Document on the Document
Copying
15
Note:
Be sure to change the copy layout first before changing the copy settings
because all copy settings (paper type, print quality, number of copies,
paper size) return to the default values when the copy layout changes.
5. You can change the copy settings, if necessary, by pressing the
illuminating buttons. (When a button lights up, this indicates it
valid.) To change each setting, see “Changing Copy Setting” on
6. Press the x Color button to copy in color, or the x B&W button
to copy in grayscale.
Caution:
Never open the scanner unit while scanning or copying; otherwise,
you may damage this product.
c
Note:
❏
❏
❏
Do not pull on the paper being copied.
The copied image may not have exactly the same size as the original.
If a message indicating low ink appears on the LCD panel while you are
copying, you can either continue making copies until the ink runs out,
or stop making copies and then replace the ink cartridge.
❏
When you select Glossyor DB Photoas paper type and then press the
xB&W button, an warning message appears and copying stops. If this
happens, press the y Stop button, and then change the paper type
setting.
16
Copying
Loading Paper
Note:
❏
The print result is affected by the kind of paper you use. For the best
quality, use the appropriate paper.
❏
❏
To print on an envelope, refer to the Reference Guide.
Keep enough space in front of this product for paper to be fully ejected.
1. Slide out the output extension tray.
2. Slide the left edge guide to the left so that the distance between
the two edge guides is slightly wider than the paper you are
going to load.
Copying
17
3. Move the feeder guard towards you.
4. Fan the paper well, and then tap it on a flat surface to even the
edges.
5. Load the paper in the sheet feeder with the face up, and the top
edge down. Slide the edge guide to fit the width of the paper.
Note:
❏
Make sure that the paper is loaded under the tabs inside the edge
guides.
❏
Make sure that the paper does not go beyond the arrow mark inside
the edge guide.
18
Copying
6. Move the feeder guard back.
Note:
❏
Always load paper before you start printing.
❏
The loading capacity differs depending on the following types of paper.
Paper Type
Loading Capacity
Up to 150 sheets
Up to 125 sheets
Up to 20 sheets
Plain Paper
Bright White Ink Jet Paper
Glossy Photo Paper
Photo Paper
Premium Semigloss Photo Paper
Matte Paper-Heavy Weight
DURABrite Photo Paper
Up to 50 sheets
Up to 20 sheets for A4 sized
DURABrite Photo Paper
Photo Quality Ink Jet Paper
Up to 100 sheets
Copying
19
Placing a Document on the Document Table
Note:
❏
Keep the document table clean.
❏
You cannot scan films.
1. Open the document cover. Place the original document facing
down on the document table. Make sure that the document is
properly aligned.
Note:
❏
Make sure the document is flat against the glass surface; otherwise
the image becomes out of focus.
❏
An area of up to 2.5 mm from the edge of the document table glass
cannot be scanned.
2.5 mm (max.)
2.5 mm (max.)
20
Copying
2. Close the document cover gently so that the document does not
move.
Note:
❏
❏
❏
Toscanthedocumentproperly, closethedocument covertoprevent
interference from the external light.
Do not leave photographs on the document table for an extended
period of time. They may stick to the glass of the document table.
Do not place heavy objects on top of this product.
Copying in Various Layouts
How to change the layout
1. Press the Copy Mode button to enter the Copy Mode.
2. Press the Menu button to enter the Copy Menu. The LCD panel
is shown as below.
Copy Menu
1.copy Layout
3. Press the OK button to select a copy layout.
Copying
21
4. Press the C or the l/r Select button repeatedly until the copy
layout you want appears on the LCD panel.
A
C
B
Copy Mode
1.Standard
D
layout
Feature
Page to
see
1. Standard
Standard copy
2. BorderFree
Copy without margins
3. Small Margins
4. Repeat-Auto
Copy with small margins
Copy an image in actual size as
many as it fits to the paper you
have selected.
5. Repeat-4
6. Repeat-9
7. Repeat-16
Copy an image multiple times on
one sheet
8. Poster-4
9. Poster-9
10. Poster-16
Divide an original image to 4, 9, or
16 enlarged copies fit to the paper
size you have selected. You can
get a poster size image by gluing all
of the copies together.
11. 2-up
12. 4-up
Copy several documents on one
sheet
5. Press the OK button to use the layout you have selected.
22
Copying
Copying without margins
You can make a copy that covers the entire page of paper by using
In the “BorderFree” layout, you can change the following settings
Menu item
Setting items/values
Plain*
Matte
Glossy
DB Photo
Print Quality
Draft
Text*
Image
Best
A4*
4" × 6"
10 × 15
Number of copies
01* to 99
Copy Density (see page 33)
Reduce/Enlarge (see page 31)
Nine steps
Actual 100%*
Auto Fit Page
A4 -> A5 74%
A5 -> A4 147%
10 × 15 -> A4 219%
A4 -> 10 × 15 54%
A4 -> 4" × 6" 55%
4" × 6" -> A4 215%
Optional Zoom (see page 33)
* indicates the default setting.
25 to 400% in 1% increments
Note:
❏
You cannot make a copy without margins if the reduce/enlarge value is
outside the range of 25 to 400% when “Auto Fit Page” is selected.
❏
Because this layout enlarge the image to a size slightly larger than the
paper size, the portion of the image that extends beyond the edge of the
paper will not be copied.
Copying
23
Copying with small margins
You can make a copy with a 1.5-mm margin around all edges of the
paper by using the “Small Margins” layout (see “How to change the
layout” on page 21 to select this layout).
8
8
1
8
2
9
3
10
1
8
2
9
3
10
4
5
6
7
4
5
6
7
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31
In the “Small Margins” layout, you can change the following settings
Menu item
Setting items/values
Plain*
Matte
Glossy
DB Photo
Print Quality
Draft
Text*
Image
Best
A4*
4" × 6"
10 × 15
Number of copies
01* to 99
Reduce/Enlarge (see page 31)
Nine steps
Actual 100%*
Auto Fit Page
A4 -> A5 70%
A5 -> A4 141%
10 × 15 -> A4 198%
A4 -> 10 × 15 47%
A4 -> 4" × 6" 48%
4" × 6" -> A4 195%
Optional Zoom (see page 33)
indicates the default setting.
25 to 400% in 1% increments
*
Note:
You cannot make a copy with small margins if the reduce/enlarge value is
outside the range of 25 to 400% when “Auto Fit Page” is selected.
24
Copying
Copying an image multiple times on one sheet
You can make multiple copies of an image on a single sheet of paper
by using “Repeat” layout (see “How to change the layout” on page
21 to select this layout). You can select number of copied image from
Auto, 4, 9 and 16.
In the “Repeat” layout, you can change the following settings (see
Menu item
Setting items/values
Plain*
Matte
Glossy
DB Photo
Print Quality
Draft
Text*
Image
Best
A4*
4" × 6"
10 × 15
Number of copies
01* to 99
Copy Density (see page 33)
Nine steps
*
indicates the default setting.
Note:
When you select Repeat-Auto, zoom setting is set to 100%. When you select
Repeat-4, Repeat-9 or Repeat-16, zoom setting is set to Auto.
Copying
25
Making a poster
You can make a poster size copy using the “Poster” layout (see page
21 to select this layout).
In the “Poster” layout, you can change the following settings (see
Menu item
Setting items/values
Plain*
Matte
Glossy
DB Photo
Print Quality
Draft
Text*
Image
Best
indicates the default setting.
Nine steps
*
Note:
❏
You can only use A4 paper for the “Poster” layout.
❏
Depending on the original image, the number of divided images may
not be 4, 9, or 16 as you selected, because this product reads the entirely
white area as blank and the area will not be printed.
26
Copying
Gluing the images together
1. Align the images.
2. Cut the crossover area, and then glue all the images together.
The illustration shows the example of
making poster with 4 printouts. The gray
area shows the excess area to be cut.
Warning:
Be careful when using edged tools.
w
Copying
27
Copying several pages on one sheet
You can copy two or four original images on a single sheet of paper
In the “2-up” or “4-up” layout, you can change the following settings
Menu item
Setting items/values
Plain*
Matte
Glossy
DB Photo
Print Quality
Draft
Text*
Image
Best
indicates the default setting.
Nine steps
*
Note:
You can only use A4 paper for the “2-up” and “4-up” layout.
28
Copying
Changing Copy Setting
In the Copy Mode, you can change the copy settings as you prefer,
using the A, B, C, and D buttons.
B
Numeric buttons
A
C
100%
A4
Plain
Text
01
D
Button
Copy setting
Paper type
Page to see
A
B
Reduce/Enlarge
Print quality
C
D
Paper size
Numeric buttons
Number of copies
By pressing the Menu button when you are in the Copy Mode, you
can adjust the following features as well.
Menu item
Page to see
Copy Layout
Copy Density
Optional Zoom
Copying
29
Saving and recalling copy settings
You can save the current copy settings (except the number of copies)
by pressing the l Select button and hold it for 3 seconds. To recall
the settings you have saved, press the rSelect button and hold it for
3 seconds.
Note:
Toreset allsettingsandreturnthem totheirdefaults, pressthe Clearbutton
and hold it for 3 seconds.
Selecting the paper type
Select the appropriate type of the paper you have loaded on the sheet
feeder as follows:
Press the A button repeatedly until the type of paper you load
appears on the LCD panel.
The paper type you can use are:
Paper Type
Plain
Description
Plain Paper/Bright White Ink Jet Paper
Matte Paper-Heavyweight/Photo Quality Ink Jet Paper
Matte
Glossy
Photo Paper/Glossy Photo Paper/Premium Semigloss
Photo Paper
DB Photo
DURABrite Photo Paper
Note:
You cannot make copies in grayscale when Glossyor DB Photois selected.
30
Copying
Selecting the copy quality
Press the C button repeatedly until the copy quality you want
appears on the LCD panel.
The options you can select are Draft, Text, Image, and Best.
Reducing or enlarging copies automatically
You can reduce or enlarge a copy automatically by selecting the size
of the original document and the copying result.
Note:
In the “2-up”, “4-up”, “Repeat”, or “Poster” layout, you cannot use this
feature.
Press the B button repeatedly until the option you want appears on
the LCD panel.
Selection
Copy result
Actual
Copy in the actual size
A4 -> A5
A5 -> A4
10 × 15 -> A4
A4 -> 10 × 15
A4 -> 4" × 6"
4" × 6" -> A4
Copy in the reduced or enlarged size by
selecting the appropriate selection
(original document size -> copy result size)
The value (%) shows the percentage of the
actual size.
Auto Fit Page
Copy in the reduced or enlarged size that fits
the size of the paper
Copying
31
Selecting the paper size
Select the appropriate size of the paper loaded on the sheet feeder as
described below.
Press the D button repeatedly until the appropriate paper size
appears on the LCD panel.
The paper size you can select are: A4, 10 × 15, 4" × 6", and A5.
Note:
When you load the 4R size paper, select 10 × 15 for the paper size setting.
Setting the number of copies
Enter the number of copies you want to make, using the numeric
buttons as described below.
Note:
❏
You can make up to 99 copies.
❏
To clear the number of copies, press the Clear button.
How to use the numeric buttons
❏
❏
❏
To enter “7,” press the 7 button.
To enter “54,” press the 5 button, and then the 4 button.
To change from “54” to “48,” simply press the 8 button (the 4 of
the “54” is moved to the ten’s place), or press the 4 and 8 buttons
in sequence.
32
Copying
Making copies lighter or darker
This product allows you to adjust the copying density in nine steps.
1. Press the Menu button to enter the Copy Menu.
2. Press the C or the l/r Select button repeatedly until 2.Copy
Densityappears on the LCD panel.
3. Press the OK button. The LCD panel is shown below.
.
A
C
B
Copy Menu
l - oooo
onnnn + r
D
4. Adjust the copy density monitoring the LCD panel. Press the C
or the lSelect button to make the copy lighter; press the D or the
r Select button to make it darker.
5. When the adjustment is finished, press the OK button.
Reducing or enlarging copies manually
You can reduce or enlarge a copy by entering a value.
Note:
In the “2-up”, “4-up”, “Repeat”, or “Poster” layout, you cannot use this
feature.
1. Press the Menu button to enter the Copy Menu.
Copying
33
2. PresstheCorthe l/rSelect buttonrepeatedlyuntil 3.Optional
Zoom appears on the LCD panel, and then press the OK button.
The LCD panel is shown below.
A
C
B
XX%
Enter a value...
D
3. Enter a value (%) for the copying size, using the numeric buttons
l/rSelect buttonrepeatedlyuntil thenumberyou wantappears
on the LCD panel, and then press the OK button.
Note:
You can adjust the size from 25% to 400%.
Canceling Copying
To cancel copying, press the y Stop button.
Note:
Do not pull on the paper. The paper being copied will come out automatically
to the output tray.
34
Copying
Printing Directly from a Memory Card
This product allows you to print photos directly from a memory card
without using a computer. For information on printing from a
computer, refer to the Reference Guide.
Note:
❏
Before printing large jobs, try a single sheet to confirm the print quality.
❏
We recommend that you disconnect the USB cable when printing
directly from a memory card; if you are printing directly from a memory
card with the USB cable connected, the print operation may take longer
time.
Printing Using an Index Form
Using an Index Form is an easy and convenient way to print directly
from a memory card. The Index Form gives you a thumbnail view of
photos stored on the memory card.
Printing Directly from a Memory Card
35
Printing an Index Form
2. Press the Card Print Mode button to enter the Card Print mode.
Note:
If the message No memory card. Operation Canceled.appears on
the LCD panel, load a memory card properly before you go on to the
next step.
3. If 1.Print Indexdoes not appear on the LCD panel, press the A
or the l/r Select button repeatedly until it appears, and then
press the D or OK button.
Note:
❏
You can only use A4 paper to print an Index Form.
❏
You cannot print more than one Index Form at a time, and cannot
select the layout.
❏
The Index Form may be several pages long, depending on the
number of photos you have on the memory card.
5. Press the x Color button to start printing the Index Form.
36
Printing Directly from a Memory Card
Printing photos by filling in the Index Form
2. On the Index Form, use a dark pen to fill in the circles underneath
the photos that you want to print, and specify the paper type.
See the examples below.
Good
Not good
Note:
Complete the Index Form correctly. You cannot change the settings
using the control panel.
3. Load paper you have selected on the Index Form.
4. If 2.Scan Indexdoes not appear on the LCD panel, press the A
or the l/r Select button repeatedly until it appears, and then
press the D or OK button.
5. Place the Index Form with its face down, and its top touching the
front left edge of the document table (see “Placing a Document
6. Press the x Color button to start printing.
Printing Directly from a Memory Card
37
Printing one photo from an Index Form
3. Press the A or the l/r Select button repeatedly until the LCD
panel shows 3.One image, and then press the D or OK button.
4. Enter the desired photo number on the Index Form using the
numeric buttons (see “How to use the numeric buttons” on page
number to print. Finally, press the D or OK button.
Note:
You can enter a number up to 999.
5. Enter the number of copies you want to make using the numeric
buttons, and then press the D or OK button.
Note:
The maximum number of copies this product can print at a time is 999.
If the total number of copies you set exceeds the maximum, the number
will be automatically adjusted to the maximum.
7. Press the x Color button to start printing.
38
Printing Directly from a Memory Card
Printing multiple photos from an Index Form
You can select and print contiguous photos on an Index Form
(e.g. from photos 3 to 12).
Note:
You can only select a continuous range of photo numbers.
3. Press the A or the l/r Select button repeatedly until the LCD
panel shows 4.Range of image, and then press the D or OK
button.
4. Enter the first photo number to print using the numeric buttons
C button repeatedly until this number appears. Finally, press the
D or OK button.
Note:
You can select a photo number up to 999.
5. Enter the last photo number in thesame way you entered the first
photo number, and then press the D or OK button.
6. Enter the number of copies you want to make using the numeric
buttons, and then press the D or OK button.
Note:
The maximum number of copies this product can print at a time is 999.
If the total number of copies you set exceeds the maximum, the number
will be automatically adjusted to the maximum.
Printing Directly from a Memory Card
39
8. Press the x Color button to start printing.
Printing All Photos on a Memory Card
Using this feature, you can print all photos stored on a memory card.
2. Press the Card Print Mode button to enter the Card Print mode.
3. Press the A or the l/r Select button repeatedly until the LCD
panel shows 5.All images, and then press the D or OK button.
4. Enter the number of copies you want to make using the numeric
buttons, and then press the D or OK button.
Note:
The maximum number of copies this product can print at a time is 999.
If the total number of copies you set exceeds the maximum, the number
will be automatically adjusted to the maximum.
6. Press the x Color button to start printing.
40
Printing Directly from a Memory Card
Printing with DPOF Functions
DPOF (Digital Print Order Format) is an industry-standard print file
request format. This product conforms to DPOF version 1.10. DPOF
lets you set photo numbers and the number of copies for photos
stored on a digital camera, before you start printing. To create DPOF
data, you must use a digital camera that supports DPOF. For details
ontheDPOFsettingsofyourdigitalcamera, seeyourdigitalcamera’s
documentation.
page 17).
2. Press the Card Print Mode button to enter the Card Print mode.
3. Press the A or the l/r Select button repeatedly until the LCD
panel shows 6.DPOF, and then press the D or OK button.
A
C
B
6.DPOF
OK
D
Note:
6.DPOFappears only if your memory card contains the DPOF data.
4. Enter the number of copies you want to make using the numeric
buttons, and then press the D or OK button.
6. Press the x Color button to start printing.
Printing Directly from a Memory Card
41
Loading Memory Cards
Loadable memory card
This product features three memory card slots.
a
b
c
The types of memory cards loadable for each slot are shown below.
Slot
Card
a
Memory Stick/MagicGate Memory Stick/Memory Stick Duo*/
Memory Stick PRO/SD Card/miniSD Card*/MultiMediaCard
b
c
SmartMedia/xD-Picture Card
CompactFlash/Microdrive
* An adapter is required.
Note:
The method to use a memory card varies depending on its card type. Be sure
to refer to the documentation packaged with your memory card for details.
42
Printing Directly from a Memory Card
Available image files
You can use image files that meet the following requirements.
*
Media format
File format
DCF version 1.0 compliant
**
JPEG or TIF format image files , DOS FAT taken with a
DCF version 1.0 compliant digital camera.
Image size
Vertical 120 to 4600 pixels, horizontal 120 to 4600 pixels
Up to 999
Number of files
* DCF stands for the “Design rule for Camera File system” standard, which is
set by the Japan Electronics and Information Technology Industries
Association (JEITA).
** Supports Exif Version 2.1/2.2.
Note:
You cannot print images with file name containing double-byte characters.
Inserting a memory card into the slot
1. Press the P On button to turn on this product.
2. Open the memory card slot cover.
Printing Directly from a Memory Card
43
3. Make sure the memory card light beside the memory card slot is
off, and then insert a memory card as far as it can go into the
appropriate slot.
Note:
You can load only one memory card at a time.
4. Close the memory card slot cover.
Caution:
❏
❏
❏
Do not try to squeeze the memory card into the slot.
Memory cards cannot be fully inserted into the card slots.
c
Incorrect loading of a memory card may damage this
product, memory card, or both.
Keep the memory card slot cover closed while the memory
card is loaded, which protects the memory card and the slot
from dust and static; otherwise data on the memory card
may be lost, or this product may be damaged.
❏
Depending on the memory card loaded in this product, the
static charge on the memory card may cause this product to
malfunction.
Note:
If the memory card is inserted incorrectly, the memory card light does
not go on.
44
Printing Directly from a Memory Card
5. If the images are stored on the memory card, the following
message appears. Press the D or OK button.
A
C
B
Found Images...
Total XXX
OK
D
Ejecting memory cards
1. Make sure all the printing job is finished and the memory card
light is not flashing.
2. Open the memory card slot cover.
3. Eject the memory card by pulling it out straight from the slot.
Caution:
❏
Do not remove the memory card or turn off the product while
the printing or while the memory card light is flashing. Data on
the memory card may be lost.
c
❏
If you are using this product with a computer which has
Windows 2000 or XP installed, never turn this product off or
disconnect the USB cable with a memory card inserted in this
product; this may destroy data on the memory card. See the
Reference Guide for detail.
Printing Directly from a Memory Card
45
Changing Print Setting
You can change the print setting when the LCD panel is in the state
shown below.
A
C
B
A4
Plain
B-Free
XXX
D
Press the button (A, B, or C) for the setting you want to change,
repeatedly until the desired option appears on the LCD panel. The
list below shows the options you can select and the required button
to press.
Button
Setting
Selection
Plain
Description
A
Paper
type
Plain Paper/Bright White Ink Jet Paper
Matte
Matte Paper-Heavyweight/Photo
Quality Ink Jet Paper
Glossy
Photo Paper/Glossy Photo
Paper/Premium Semigloss Photo
Paper
DB Photo
DURABrite Photo Paper
B
Paper
size
A4
10 × 15
4" × 6"
C
Layout
B-Free
Prints without margin: image covering
the whole page.
1-up
2-up
4-uP
8-up
20-up
80-up
Prints multiple photos on one sheet:
e.g. with 8-up, 8 photos/sheet.
The size of each photo is adjusted
automatically according to the
number of photos to print and the size
of paper.
Upper1/2
Prints on upper half part of paper
46
Printing Directly from a Memory Card
Scanning by using the LCD panel and
buttons
This product allows you to scan images to a memory card, computer,
or e-mail (available on a computer), and then edit them to meet your
needs.To scanimagesto acomputerore-mail, seetheReference Guide.
Note:
You cannot scan films.
Available scanning options:
Option
Page to see
1. To Photo Card (scanning to memory card)
2. To PC (scanning to computer)
3. To E-mail (scanning to e-mail)
Scanning to Memory Card
You can scan an image and then save it on a memory card directly
without using a computer. The scanned images are saved in the JPEG
format.
Note:
If the message The card is not properly formatted. Would like
to format the card?appears on the LCD panel, format the memory card
cancel formatting, and then exchange it with a formatted one.
2. Press the Scan Mode button to enter the Scan Mode.
48
Scanning by using the LCD panel and buttons
3. Press the Aor the l/rSelect button repeatedly until 1.To Photo
Cardappears on the LCD panel. Then press the D or OK button.
A
C
B
1.To Photo Card
OK
D
4. Use the A, B, and C buttons to select the appropriate Document
type, Print quality, and Scan area. Press the corresponding
button repeatedly until the selection you want appears on the
LCD panel (see the list below). Then press the D button.
Button
Setting
Selection
A
Document type
Text
Graphic
B
Scan area
Auto
Max.
C
Scan quality
Normal
Photo (available and suitable for
Graphic document type)
Fine (available and suitable for
text document type)
a Document on the Document Table” on page 20). Then press the
x Color button to start scanning.
Caution:
Never open the scanner unit while scanning or copying;
otherwise, you may damage this product.
c
Note:
The scanned images are saved in the “epscan” folder automatically
created when you scan to the memory card.
Scanning by using the LCD panel and buttons
49
Caution:
Do not remove the memory card or turn off the product while
printing or while the memory card light is flashing. Data on the
memory card may be lost.
c
Formatting a memory card
If the message The card is not properly formatted. Would like
to format the card?appears on the LCD panel, you can format the
memory card as follows:
Caution:
All data on a memory card is deleted when you format the memory
card.
c
1. Press the D button.
2. Press the x Color button to start formatting. After formatting is
finished, this product returns to the mode before you began
formatting the memory card.
50
Scanning by using the LCD panel and buttons
Scanning to Your Computer
This product allows you to scan an image to a computer or send an
e-mail with the scanned image attached by using this feature. Before
using this feature, make sure you have installed EPSON Scan and
EPSON Smart Panel on your computer.
1. Connect this product to your computer with a USB cable, and
then start up the computer.
3. Press the Scan Mode button to enter the Scan Mode.
4. Press the A or the l/r Select button repeatedly until 2.To PC
appears on the LCD panel, and then press the D or OK button.
A
C
B
2.To PC
OK
D
The original document is scanned to your computer and EPSON
Smart Panel is launched. For details on the operating instructions
of EPSON Smart Panel, see its Help.
Caution:
Never open the scanner unit while scanning or copying;
otherwise, you may damage this product.
c
Scanning by using the LCD panel and buttons
51
Scanning Directly to Your e-mail
This product allows you to scan an image and then send an e-mail
with the scanned image attached. Before using this feature, make
sure you have installed EPSON Scan and EPSON Smart Panel on your
computer.
1. Connect this product to your computer, and then start up the
computer.
3. Press the Scan Mode button to enter the Scan Mode.
4. Press the A or the l/r Select button repeatedly until 3.To
E-mailappears on the LCD panel, and then press the D or OK
button.
A
C
B
3.To E-mail
OK
D
For details on further steps, see the Reference Guide.
Caution:
Never open the scanner unit while scanning or copying;
otherwise, you may damage this product.
c
Canceling Scanning
To cancel scanning, press the y Stop button.
52
Scanning by using the LCD panel and buttons
Replacing Ink Cartridges
This product monitors the amount of ink left in each cartridge, using
anICchipbuiltinto thecartridge. Ifitdetects theinkisloworrunning
out, it notifies you of the ink cartridge to replace, using a message on
the LCD panel or your computer.
Ink Cartridges
You can use the following cartridges with this product.
Black ink cartridge
Color ink cartridge
Black
T0431, T0441
Cyan
Magenta
Yellow
T0442, T0452
T0443, T0453
T0444, T0454
Caution:
EPSON recommends the use of genuine EPSON ink cartridges.
EPSON will not warranty any damage caused by the use of other
products.
c
Checking the Ink Level
You can check the ink level either on the LCD panel or on your
computer. See the Reference Guide for details on how to check the ink
level on the computer.
Replacing Ink Cartridges
53
Checking the ink level using the LCD panel
1. Make sure this product is on, and then press the Setup Mode
button.
2. Press the A button repeatedly until 2.Ink levelsappears on the
LCD panel and then press the xColor button. The amount of ink
appears.
A
C
B
Ink levels
C:50% M:50% Y:50%
D
3. If you want to replace the ink cartridge, go on to the next section.
To return to the previous display without replacing the ink
cartridge, press the OK button.
Caution:
Leave the used ink cartridge installed until just before
replacement; otherwise, ink remaining in the print head nozzles
may dry out.
c
Precautions on Ink Cartridge Replacement
Read all of the instructions in this section and “When handling ink
cartridges” on page 9 before replacing the ink cartridges.
❏
If you need to remove an ink cartridge temporarily from this
product, besure to protecttheinksupply areaofthe ink cartridge
from dirt and dust. Store the ink cartridge in the same
environment as this product. When storing the cartridge, be sure
that its label identifying the color of the ink cartridge is facing
upward. Do not store ink cartridges upside down.
54
Replacing Ink Cartridges
❏
❏
The valve in the ink supply port is designed to contain any excess
ink that may be released. However, careful handling is
recommended. Do not touch the supply port of the ink cartridge
or its surrounding area.
This product uses ink cartridges equipped with an IC chip. The
IC chip accurately monitors the amount of ink used by each
cartridge, so evenifacartridgeis removedandthenlaterinserted
again, all of its ink can be used. However, some ink is consumed
each time the cartridge is inserted because this product
automatically checks its reliability.
❏
❏
When an ink cartridge becomes empty, you cannot continue
copying even if the other cartridge still contains ink. Before
copying, replace the empty cartridge.
In addition to being used in document copying, ink is also
consumed in the following operations: print head cleaning,
self-cleaning cycle performed when this product is turned on,
and ink charging when an ink cartridge is installed in this
product.
❏
❏
Do not refill the ink cartridges. This product calculates the
amount of ink remaining using an IC chip built into an ink
cartridge. Even if the cartridge is refilled, the amount of ink
remaining is not recalculated by the IC chip and therefore the
amount of ink available for use does not change.
After an ink cartridge is replaced, if the ink is low it may become
empty. When a message appears to indicate the ink is low,
prepare a new ink cartridge.
Replacing Ink Cartridges
55
Replacing an Ink Cartridge
Follow the steps below to replace ink cartridges.
Note:
Before replacing an ink cartridge, read “Precautions on Ink Cartridge
1. Make sure this product is on.
2. When the ink is empty:
Refer to the LCD panel message to see which ink cartridge is
empty, and then press the x Color button.
When the ink is low:
Press the Setup Mode button to enter the Setup Mode and press
the A button repeatedly until 5.Ink cartridgeappears on the
LCD panel, and then press the x Color button.
A
C
B
5.Ink cartridge
Press the Start...
D
The ink cartridges move to the replacement position.
56
Replacing Ink Cartridges
3. Make sure that the document cover is closed, and then open the
scanner unit.
Caution
❏
❏
❏
Do not open the scanner unit when the document cover is
still open.
c
Do not move the print head by hand. Doing so may damage
this product.
Do not start replacing an ink cartridge before the print head
stops.
4. Before taking out a new ink cartridge from its package, shake it
four to five times.
Replacing Ink Cartridges
57
5. Open the cartridge cover.
6. Pinch the sides of the ink cartridge that you want to replace. Lift
the cartridge out of this product and dispose of it properly. Do
not take the used cartridge apart or try to refill it.
The illustration shows
replacement of the
black ink cartridge.
Warning:
Be careful when you handle the used ink cartridges. There may
w
be some ink around the ink supply port. If ink gets on your skin,
wash the area thoroughly with soap and water. If ink gets into
your eyes, flush them immediately with water. If discomfort or
vision problems remain after a thorough flushing, see a doctor
immediately.
Caution:
Leave the used ink cartridge installed until just before
replacement; otherwise, ink remaining in the print head nozzles
may dry out.
c
58
Replacing Ink Cartridges
7. Install the new ink cartridge straight into the cartridge holder,
and then press the top of the cartridge until it clicks into place.
If you need to replace the other ink cartridge, repeat steps 6 and 7.
8. Close the cartridge cover.
Note:
If you find it difficult to close the cartridge cover, see step 7 to make sure
the ink cartridge has been installed correctly.
Replacing Ink Cartridges
59
9. Close the scanner unit.
The print head moves to its home position, and ink charging
begins. Charging...appears on the LCD panel when ink
charging is in progress. Charging...disappears from the LCD
panel when ink charging is completed.
Caution:
Never turn off this product while Charging...appears on the
LCD panel; Otherwise, this will cause incomplete charging of
the ink.
c
Note:
If you install a used ink cartridge with ink level already low, it may
become empty right after the replacement. In this case, replace the ink
cartridge with a new one.
60
Replacing Ink Cartridges
Maintenance and Transporting
Checking the Print Head Nozzles
If you find that a printed image is unexpectedly faint or some dots
in the image are missing, checking the print head nozzles helps you
to identify the problem.
Follow the steps below to check the print head nozzles using the
control panel.
Note:
When the ! Error light is on and a message appears on the LCD panel to
prompt you to replace an ink cartridge or to indicate the ink is low, you
cannot clean theprint head. In this case, replacetheappropriateinkcartridge
first.
1. Make sure that A4 or Letter paper is loaded in the sheet feeder.
2. Make sure that this product is on, and the ! Error light is off.
3. Press the Setup Mode button to enter the Setup Mode.
4. Press the A or the l/r Select button repeatedly until 3.Nozzle
checkappears on the LCD panel, and then press the x Color
button. This product starts printing.
Maintenance and Transporting
61
5. Check the printout. The following examples indicate when the
print head needs to be cleaned.
Good: print head does not need to be cleaned yet.
Not Good: print head needs to be cleaned.
The actual printouts are printed in color (CMYK).
If the nozzle check result is not good, there is a problem with this
product. It may be a clogged ink nozzle or a misaligned print head.
To solve these problems, see the next two sections for details.
Cleaning the Print Head
If you find that the nozzle check result is unexpectedly faint or some
dots in the printed image are missing, you may be able to solve these
problems by cleaning the print head, which ensures that the nozzles
are delivering ink properly.
Note:
❏
Print head cleaning uses both color and black ink. To avoid wasting ink,
clean the print head only if the copy quality drops (for example, blurred
printout, incorrect or missing color).
❏
Before cleaning the print head, perform the nozzle check first to see if it
really needs to be cleaned. This saves ink.
62
Maintenance and Transporting
❏
When the ! Error light is on and a message appears on the LCD panel
to prompt you to replace the ink cartridge or to indicate the ink is low,
you cannot clean the print head. In this case, replace the appropriate
ink cartridge first.
Follow the steps below to clean the print head using the Control
Panel.
1. Make sure this product is on, and the ! Error light is off.
2. Press the Setup Mode button to enter the Setup Mode.
3. Press the A or the l/r Select button repeatedly until 4.Head
Cleaningappears on the LCD panel, and then press the xColor
button. Cleaning of the print head starts and Head cleaning...
appears on the LCD panel.
Caution:
Never turn off this product while Head cleaning...appears
on the LCD panel. Doing so may damage this product.
c
4. When Head cleaning...disappears from the LCD panel,
perform the nozzle check to confirm that the head is clean and
to reset the cleaning cycle. See “Checking the Print Head
Note:
❏
❏
❏
If the print quality has not improved after repeating this procedure
four or five times, turn this product off and leave it alone overnight.
Then, perform the nozzle check again and repeat head cleaning if
necessary.
If the print quality still has not improved, one or more of your ink
cartridges may be old or damaged and may need to be replaced. To
replace an ink cartridge, see “Replacing an Ink Cartridge” on page
To maintain the finest print quality, we recommend printing a few
pages at least once a month.
Maintenance and Transporting
63
Aligning the Print Head
If you notice vertical lines are not aligned properly on the nozzle
check result, you may be able to solve this problem by aligning the
print head.
Follow the steps below to align the print head using the Control
Panel.
Note:
Do not press the y Stop button to cancel printing while printing an
alignment pattern.
1. Make sure that A4 or Letter paper is loaded in the sheet feeder.
2. Make sure that this product is on, and the ! Error light is off.
3. Press the Setup Mode button to enter the Setup Mode.
4. Press the A or the l/r Select button repeatedly until 6.Head
alignmentappears on theLCD panel, and then press thex Color
button. The alignment patterns are printed.
A
C
B
6.Head alignment
Press the Start...
D
5. Look at the alignment patterns. Find the pair of vertical lines that
is aligned in pattern #1, and then enter the number using the
numeric buttons. Finally, press the x Color button.
6. The next pattern number appears. As with pattern #1, find and
register the aligned pairs for the remaining alignment patterns
#2 through #5.
64
Maintenance and Transporting
7. After setting all of the alignment patterns, Head alignment
appearsontheLCD panelagain. Ifyou want tocontinue theprint
head alignment operation, press the x Color button to print the
alignment patterns again; otherwise, press the y Stop button.
Note:
Even if you press the y Stop button, the settings you made in step 5
remains saved.
8. Look at the alignment patterns. Find the pair of horizontal bars
with no dark or light band between them, and then select the
number of the pair using the numeric buttons.
9. Press the x Color button to register your selection.
10. If you wantto continue the print headalignment operation, press
the x Color button to print the alignment patterns and repeat
steps 7 and 8. If you want to stop the print head alignment
operation, press the y Stop button.
After all patterns are set, the print head alignment operation is
completed.
Transporting This Product
If you need to transport this product, carefully repack it using the
original box (or a similar box that this product fits snugly into) and
packing materials as follows:
Caution:
❏
When storing or transporting this product, avoid tilting it,
placing it vertically or turning it upside down; otherwise ink
may leak from the cartridge.
c
❏
Leave the ink cartridges in their installed positions when
transporting this product; removing the cartridges for
transportation may damage this product.
Maintenance and Transporting
65
1. Remove all paper from the sheet feeder and make sure that this
product is off.
2. Open the scanner unit and make sure that the print head is in the
home position on the right. Secure the ink cartridges to this
product with a tape, and then close the scanner unit.
3. Unplug the power cord from the electrical outlet and the USB
cable from your computer if connected.
4. Removethe papersupport andthefeederguard. Push theoutput
extension tray in.
5. Attach the protective materials to both sides of this product, and
then repack this product, the power cord and the USB cable in
the box.
66
Maintenance and Transporting
6. Keep this product on a flat surface to protect it from shocks
during transportation.
Note:
Do no forget to remove the protective materials and tape from this product
before using it again.
Maintenance and Transporting
67
Troubleshooting
Error Messages
You can identify many common problems using the ! Error light and
error messages on your Control Panel. If this product stops working
and the ! Error light is on, use the following table of error messages
to diagnose the problem, and then try the recommended solution.
Note:
The solutions are for the problems that happen when using this product
stand alone. Refer to the online Reference Guide on detailed solutions for
printing, scanning, print quality, or computer-related problems.
Error Messages
Problem
Solution
There is no Index
Sheet or it is not
set correctly.
Please perform
again after a
check.
The Index Form is
not placed
correctly.
Place the Index Form
correctly. See “Placing a
Check ofa picture
isnot carriedout
or marking is not
right. Please
The photos and
thepapertype are
not selected
correctly on the
Index Form.
Fill in the circle on the Index
Formtoselectthephotosand
the paper type correctly. See
perform again
after a check.
Paper is not
The paper type is
not selected
correctly on the
Index Form.
Fill in the circle on the Index
Form toselectthepaper type
correctly. See “Printing
selected on the
Index Sheet orthe
oval isnot filled
in correctly.
Check the Index
Sheet, then try
again.
68
Troubleshooting
Error Messages
Problem
Solution
The data on the
memory card has
changed. Print a
new Index Sheet,
then try again.
After an Index
Form is printed, an
image file on the
memory card is
added or
Print the Index Form again.
removed.
No memory card.
Operation
No memory card is
loaded when you
select to print
Load the memory card. See
canceled.
directly from a
memory card or to
scan to a memory
card.
Cannot recognize
the memory card.
Do you want to
The memory card
loaded in this
product cannot
be recognized.
Format the memory card or
load a new memory card.
format the card?
Thememorycard is
write-protect.
Operation
You cannot save
the image to the
memory card.
Release the write protection
or load another memory
card.
canceled.
There is not
enough free space
on the memory
card. Operation
canceled.
Notenoughspace
is available to save
the image to the
memory card.
Load a new memory card.
Cannot create a
memory card
Cannot create a
folder on the
memory card.
Load a new memory card.
Load a new memory card.
folder. Operation
canceled.
The memory card
was removed.
Operation
The memory card
is ejected during
the operation.
canceled.
Cannot be stored
saved in the XXX
mode.
The Save button is
pressed in a mode
other than the
You can only save the
settings of the Copy mode.
Copy mode.
Troubleshooting
69
Error Messages
Problem
Solution
The B&W button
cannot be used to
print in this
mode. Press the
Color button to
print.
The B&W button is
pressed while
printing is done
directly from the
memory card.
Press the x Color button
when you print directly from
the memory card. When you
copy in grayscale, select an
item other than Glossy or DB
Photo as the paper type.
The adjust lever
is in the
Theadjustleverisin
the ^ position.
Set the adjust lever to the
m position except when
printing on envelopes.
^ position.
Except when
printing on
envelopes, the
m position is
recommend.
No XXX ink
The ink cartridge
indicated in the
message is not
installed.
Press the x Color button and
open the scanner unit by
following the messages to
install the ink cartridge. See
cartridge->Press
the Color button
toinstall newink
cartridge.
XXX ink out ->
Press the Color
button to begin
replacement ink
cartridge.
The ink cartridge
indicated in the
message is empty.
Press the x Color button and
open the scanner unit by
following the messages to
replace the empty cartridge.
XXX ink cartridge
error->Cartridge
replacement is
necessary. Press
the Color button
to begin.
Error occurs at the
ink cartridge.
Press the x Color button and
open the scanner unit by
following the messages to
replace the empty cartridge.
Paper out -> Load
paper into the
sheetfeeder,then
press the Color
button.
No paper is
loaded in the
sheet feeder.
Load paper in the sheet
feeder, and then press the x
Color button.
Scanner unit open
-> Close the
Scanner unit is
open.
Close the scanner unit
securely.
scanner unit.
70
Troubleshooting
Error Messages
Problem
Solution
Paper jam-> Press
the Color button.
Remove any
Paper jams occur.
Press the x Color button. If
the paper jam is not cleared,
remove the jammed paper
by hands. See “Clearing the
remaining jammed
paper by hand.
Multi-page feed
error -> Multiple
pages have been
fed into the
Multiple pages
have been fed
into the printer at
once.
Remove and reload the
paper, then press the x Color
button.
printer at once.
Remove and reload
the paper, then
press the Color
button.
Scanner error ->
See your
Error occurs in the
scanner parts.
Turnthisproductoff,andthen
back on. If the error message
still appears, contact your
dealer.
documentation and
call service if
necessary.
Printer error ->
See your
Error occurs in the
printer parts.
Turnthisproductoff,andthen
back on. If the error message
still appears, contact your
dealer.
documentation and
call service if
necessary.
Service required.
Contact your dealer.
The Copied Image is Improperly Sized
When Auto Fit Pageis selected as the Reduce/Enlarge setting on
the LCD panel and the border of the original document is white or
very light, the size of the original might not be recognized correctly.
This may cause the copied image to be improperly sized. To correct
this, select Actual 100%as the Reduce/Enlarge setting and then use
the Optional zoom setting to adjust the size of the copied image.
Troubleshooting
71
Clearing the Jammed Paper
If paper is jammed inside this product, an error message appears on
the LCD panel. You may be able to clear the jammed paper using the
Control Panel. Follow the instructions below.
1. Press thexColorbutton toejectthejammedpaper. Ifthejammed
paper is not ejected, go on to the next step.
2. Locate where the paper is jammed.
If the paper is jammed at the paper feeding position or the
ejecting position, remove all of the paper by hand.
If the paper is jammed inside this product, press the P On
button to turn off this product. Open the scanner unit, and then
remove all of the paper inside by hand, including any torn pieces.
3. After clearing the jammed paper, close the scanner unit and then
press the P On and the x Color button.
4. Load a stack of paper in the sheet feeder.
Memory Card Caught Between the Memory
Card Slot and the Memory Card Cover
Keep the memory card cover open, and then repeatedly close and
open the memory card cover.
72
Troubleshooting
Contacting Customer Support
Regional Customer Services
If your EPSON product is not operating properly and you cannot
solve the problem using the troubleshooting information in your
product documentation, contact customer support services for
assistance. If customer support for your area is not listed below,
contact the dealer where you purchased your product.
Customer support will be able to help you much more quickly if you
give them the following information:
❏
Product serial number
(The serial number label is usually on the back of the product.)
❏
❏
Product model
Product software version
(Click About, Version Info, or similar button in the product
software.)
❏
❏
❏
Brand and model of your computer
Your computer operating system name and version
Names and versions of the software applications you normally
use with your product
Note:
For more information on Contacting Customer Support, see the Online
Reference Guide.
Contacting Customer Support
73
For users in the United Kingdom and the Republic of Ireland
URL
08701 637 766
Telephone (UK)
(The Republic of Ireland) 01 679 9016
For users in the Middle East
URL
+971 4 352 4488
E-mail
Telephone
Fax
+971 4 351 6617
For users in Scandinavia
URL
Telephone
Denmark 80 88 11 27
Finland 0800 523 010
Norway 800 11 828
Sweden 08 445 12 58
For users in South Africa
URL
Telephone
(011) 444-5223 or 0800 600 578
74
Contacting Customer Support
For user in France
Support Technique EPSON France,
0 892 899 999 (0,34 E/minute)
Ouvert du lundi au samedi de 9h00 à 20h00 sans interruption
accéder à l'AIDE EN LIGNE.
accéder aux SERVICES du support technique.
For user in Germany
EPSON Service Center c/o Exel Hünxe GmbH
Werner-Heisenberg-Strase 2
46569 Hünxe
For user in Italy
EPSON Italia S.p.a.
Via M. Viganò de Vizzi, 93/95
20092 Cinisello Balsamo (MI)
Tel. 02.660.321
Fax. 02.612.36.22
Assistenza e Servizio Clienti
TECHNICAL HELPDESK
02.268.300.58
Contacting Customer Support
75
For users in Spain
URL
902 40 41 42
E-mail
Telephone
Fax
93 582 15 16
For users in Portugal
URL
707 222 000
E-mail
Telephone
Fax
21 303 54 90
76
Contacting Customer Support
Product Information
Product Specifications
Electrical
120V Model
Input voltage range
Rated frequency range
Power consumption
108 to 132V
50 to 60 Hz
Approx. 15 W (ISO10561 Letter pattern)
Approx. 3.5 W in sleep mode
Approx. 0.3 W in power-off mode
220-240V Model
Input voltage range
Rated frequency range
Power consumption
198 to 240V
50 to 60 Hz
Approx. 14 W (ISO10561 Letter pattern)
Approx. 3.5 W in sleep mode
Approx. 0.5 W in power-off mode
Note:
Check the label on the back of this product for the voltage information.
Environmental
Temperature
Operation:10 to 35°C (50 to 95°F)
Product Information
77
Mechanical
Paper path
Sheet feeder, rear entry
Sheet feeder capacity
About 150 sheets at 90 g/m² (24 lb) paper
Dimensions
Weight
450 mm × 429 mm × 218 mm
(W × D × H, not including rubber feet and loading
tray)
8.7 kg (19.2 lb) without ink cartridges
Printing
Printing method
On-demand ink jet
Nozzle configuration
Monochrome (black) 180 nozzles
Color (cyan, magenta, yellow) 177 nozzles
(59 nozzles per color × 3)
Scanning
Scanner type
Flatbed color image scanner
Document size
8.5 × 11.7“(216 × 297 mm) A4 or US letter size
(The reading area can be specified from your
software.)
Scanning resolution
1200 dpi (main)
2400dpi (sub)
78
Product Information
Paper
Note:
Since the quality of any particular brand or type of paper may be changed
by the manufacturer at any time, EPSON cannot guarantee the quality of
any non-EPSON brand or type of paper. Always test a sample of paper stock
before purchasing large quantities or printing large jobs.
Paper specifications
Plain Paper:
Size
A4 (210 × 297 mm)
A5 (148 × 210 mm)
Paper type
Plain bond paper, special paper distributed by
EPSON
Thickness(forplainbond
paper)
0.08 to 0.11 mm (0.003 to 0.004 inch)
Weight (for plain bond
paper)
64 g/m² (17 lb) to 90 g/m² (24 lb)
Bright White Ink Jet Paper
Size
A4 (210 × 297 mm)
Paper type
Special paper distributed by EPSON
Glossy Photo Paper
Size
A4 (210 × 297 mm)
Paper type
Special paper distributed by EPSON
Product Information
79
Photo Paper:
Size
4 × 6" (113.6 × 175.4 mm)
10 × 15 cm
4R (100 × 145 mm)
Paper type
Special paper distributed by EPSON
Premium Semigloss Photo Paper:
Size
A4 (210 × 297 mm)
Paper type
Special paper distributed by EPSON
Matte Paper-Heavyweight:
Size
A4 (210 × 297 mm)
Letter (215.9 × 279.4)
Paper type
Special paper distributed by EPSON
DURABrite Photo Paper:
Size
A4 (210 × 297 mm)
4 × 6" (113.6 × 175.4 mm)
10 × 15 cm
Paper type
Special paper distributed by EPSON
Photo Quality Ink Jet Paper
Size
A4 (210 × 297 mm)
Special paper distributed by EPSON
Paper type
80
Product Information
Note:
❏
Poor quality paper may reduce the print quality and cause paper jams
or other problems. If you have print quality problems, switch to a higher
grade paper.
❏
❏
Do not load curled or folded paper.
Use paper under normal conditions:
Temperature 15 to 25°C (59 to 77°F)
Humidity 40 to 60% RH
Printable area
Refer to the appropriate section for printable area of a single sheet
using copy mode.
A
B-L
B-R
C
The diagonal lines indicates printable area.
Standard
Copy
Small Margins
Copy
BorderFree
Copy
A: top margin
3.0 mm (0.12")
3.0 mm (0.12")
3.0 mm (0.12")
3.0 mm (0.12")
1.5 mm (0.6")
1.5 mm (0.6")
1.5 mm (0.6")
1.5 mm (0.6")
0 mm
0 mm
0 mm
0 mm
B-L: left margin
B-R: right margin
C: bottom margin
Note:
Depending on the type of paper used, print quality may decline in the top
and bottom areas of the printout, or these areas may be smeared.
Product Information
81
|