Cary Audio Design Stereo Amplifier CAD 200 User Manual

o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
CAD 500 MB  
Pure Balanced Mono Power Amplier  
CAD 200  
Stereo Power Amplier  
NOTE: Before installing your new component, please read this manual carefully  
as it will inform you of the product specications, proper installation and correct  
operating procedures for your unit. Also included in this manual are guidelines  
on how to service and care for your new Cary Audio Design product.  
 
WELCOME__________________________________________________________  
Greetings to all of you! I would like to tell you the story on how the mono bloc solid state power amplifiers  
called the 500 MB came about. The 500 MB’s are a pair of discrete, true balanced 500 watt amplifiers. In  
fact, these music powerhouses will yield 1,000 watts at a 4 ohm load. What, solid state from the triode  
tube crazed Dennis Had, some may ask? If someone had asked me 16 years ago when I started Cary  
Audio, ‘Are you going to build high power transistor amplifiers?’ My response would have been almost in  
the form of a lecture about how high power amplifiers corrupt. If the first watt is no good than why would  
you want 499 more of them? Oh, the self-righteous 'tube-o-phile' in me would have kept you listening all  
night to my design philosophies. Well, if I may, I would like to explain how this high power craze came  
about. Or how I became corrupted by high current, wide bandwidth, SOLID STATE power amplifiers…  
About six years ago, Gregg Dunn, our Cary Audio sales manager joined the company. Although he loved  
tubes in audio he felt we needed to seriously enter the home theater market place. Gregg convinced Billy  
and I that with our reputation for having the best sounding two channel tube gear, we could design and  
become the best in multichannel solid state amplifiers. Within about six months I completed the CAD  
500T, a five channel Cary Cinema amplifier. It weighed in at 168 pounds, measured over two and a half  
feet deep and contained five individual monster EI core power transformers. The CAD 500T was  
constructed of all machined aluminum.  
The June 1999 issue of Home Theater Magazine featured our new monster amp on the front cover along  
with a glowing review. We were in the home theater arena. Well, not exactly, the amplifier was sooo  
heavy, sooo large and expensive (30” x 19” x 14”, $8,000) no one wanted to lift it. We sold a couple dozen  
and I was back to the drawing board. Two years later I completed the sleek, slimmed down, five channel  
Cinema 5 power amplifier.  
The Cinema 5 became the lead product of our new Cary Cinema line of products. We received both a  
2003 Editor’s Choice award from The Absolute Sound magazine and a Multichannel Amplifier of the Year  
Award from The Perfect Vision magazine! It repeated as a Best Buy Award from both of those prestigious  
magazines in 2004 and has repeated for 2005! The Cinema 5 continues to receive product of the year  
awards around the world. It is now the reference multichannel power amplifier for Peter Moncrieff of Wide  
Screen Review magazine and it unseated a very famous foreign made $11,000 multichannel power  
amplifier in the process. Did we mention that the CINEMA 5 is made in North Carolina?  
Next came the seven by 100 watts per channel model Cinema 7 power amplifier. We have just won the  
Home Theater magazine, 2005 Rave Award for the Best Amplifier (Cinema 7) under $3000. The enthusiast  
press and the customers are all singing the sonic merits of the Cary Audio Design solid state amplifiers. It  
was time for some SERIOUS two channel stereo action with this design.  
Once again, Gregg came to me with an idea. I can still hear him…. “High power, full bandwidth and low  
distortion in a mono amp package”. He had this wild look in his eye as he insisted that we needed a 500  
watt mono amplifier. Oh, it also had to play at 1,000 watts into 4 ohms. Since Gregg has had some serious  
home run ideas in the past, I thought OK, let me do some basic design work. Soon the design work turned  
into a personal passion: An intense desire on my part to produce absolute sonic excellence in the listening  
qualities and load handling capabilities of this high power, solid state power amplifier.  
First, I started with the same power supply and power transformer that ran all 5 channels of our Cinema 5.  
Then I proceeded to implement the basic emitter follower design that was winning all the awards. I chose  
direct coupled FET inputs driving bipolar Sanken 50 ampere, high current, wide bandwidth bipolar output  
3
 
devices. The amplifier also needed to be true fully balanced design to match some new preamplifier  
designs that I was completing. The basic prototypes were sounding much too good for our listening room  
at the factory. I took them home and I was now listening in my own living/listening room. The CAD 500  
MB had me on my hands and knees with clip leads, various parts and a soldering iron. My wife knew this  
was turning into a serious design and listening project. The listening room looked like a parts depot or an  
electronics warehouse! Picture this scene if you can, a pair of the new raw prototype CAD 500 MB’s along  
with a pair of CAD 211 Anniversary Edition tube amplifiers sitting in line with a pair of CAD 805  
Anniversary Edition tube amplifiers. I was into serious listening comparisons with no holds barred. I almost  
wore out a few of my records in the process.  
To speed up this tale of high power corruption, within a few weeks I had become very fond of the sonic  
presentation from the CAD 500 MB’s. The final design challenge was to increase the sound stage depth  
and have the midrange bloom a bit more. Well, I must say I achieved success! The CAD 500 MB amplifiers  
have a deep sound stage, a glorious midrange along with enough serious, high current output power to  
shake the house.  
NOTE: Let me digress here for a moment about why we choose to make such wide frequency response  
bandwidth amplifier or preamplifier designs. In the design phase of earlier Cary Audio Design tube and  
solid state amplifiers or preamplifiers, we always noticed a positive correlation between extended  
frequency response and sound quality. This could be measured in some ways with test gear but not in all  
ways. It could be heard always, though, as improved sound quality. When the V 12R and Rocket 88R  
power amplifiers were modified to include a high gain, extremely wide bandwidth driver tube in the front  
end stage, the distortion dropped remarkably with the increase of the overall frequency response  
bandwidth of the circuit. To say this another way, if all other design characteristics are exactly the same  
but you increase the frequency response bandwidth of the overall circuit then the distortion in the circuit  
will drop in direct response to this change. We view this as a positive correlation and we choose to design  
with this in mind in all of our current and in our future circuit designs.  
The boys and girls in the Cary Audio “toy” factory have been manufacturing the CAD 500 MB’s since  
February. I have heard from many satisfied customers from all corners of the world about how happy and  
pleased they are with their new reference quality solid state power amplifiers. They simply love their new  
CAD 500 MB’s. My own pair of CAD 500 MB’s has not been turned off in my home listening room since  
January. They are great fun and such a pleasure to listen to with any type of music.  
Oh, get this…… Gregg has some of our custom home theater installers using … you guessed it … five (5)  
CAD-500 MB’s in home cinema surround sound systems! Talk about total corruption. We love It!  
We have made extensive rated output power, distortion and price comparisons to some of our  
competitor’s mono power amplifier models verses the CAD 500 MB. I truly believe we offer the best  
sound, the best power and the best value in a high power, solid state power amplifier in the market!  
Thank you for your continued interest in and continuing support of Cary Audio Design.  
Yours Truly,  
Dennis J. Had  
President  
Cary Audio Design  
4
 
INTRODUCTION____________________________________________________  
Congratulations!  
You have just purchased one of the finest solid state power amplifiers made. Whether in mono, stereo or  
in multi channel usage, the CAD 500 MB and the CAD 200 are audiophile quality power amplifiers. In  
addition to awesome power delivery, the CAD 500 MB and the CAD 200 power amplifiers deliver flawless  
reproduction of musical detail.  
Cary Audio Design solid state power amplifier features include:  
Remote trigger (works with + 4.2 to + 32 Volts DC)  
Short circuit protection,  
Thermal Protection circuits  
DC offset protection  
Matched 50 MHz multiple emitter output transistors  
Soft start circuit prevents “Brown outs” when amplifier is turned on  
Pure Balanced FET input section in the CAD 500 MB mono balanced power amplifier  
The Cary Audio Design CAD 500 MB and CAD 200 power amplifiers have three separate protection circuits  
to prevent damage to your speaker and the power amplifier.  
AC Fuse - Fused with a 3.5A/7.5A for 240V and a 7.5A/15A for 120V.  
Thermal protection - if a channel overheats its output is disconnected until it cools down to a safe  
operating temperature.  
DC offset sensor - If an amplifier malfunction or signal source malfunction occurs, the potential  
exists for providing DC voltage to the loudspeaker. If this happens, the channel will automatically  
shut down. No damage can occur.  
In building the CAD 500 MB and CAD 200 power amplifiers, significant effort has been focused on  
building an amplifier that delivers outstanding mechanical performance, is easy to use, and has sonic  
properties that will delight the most demanding audiophile customer. Thank you for choosing Cary Audio  
Design and we hope you enjoy your new power amplifier.  
*Short circuit protection activates if load impedance is about 1.6 ohms or less. Constant tripping of short circuit can  
degrade output transistors. To reset protection, turn the amplifier off, wait 10 seconds, then turn the amplifier on.  
5
 
SPECIFICATIONS ___________________________________________________  
This section describes the basic specifications of the CAD 500 MB or CAD 200 power amplifiers at the time  
of printing. Specifications are subject to change without notice or obligation. When the following  
cautionary terms are used in this manual, these definitions apply:  
WARNING  
Electrical hazard! Misuse or failure to follow instructions properly may result in personal injury  
or death!  
CAUTION  
No risk or personal injury; however, misuse or failure to follow instructions may result in  
damage to equipment.  
NOTE  
No risk of personal injury or equipment damage; however, misuse or failure to follow  
instructions may prevent proper performance of the equipment.  
........................................................................................................................................................................................................................  
RATED POWER OUTPUT  
CAD 500 MB  
CAD 200  
500 watts @ 8 ohms, 1,000 watts @ 4 ohms, Class A/B  
200 watts/channel - 8 ohms, Class A/B x 2  
350 watts/channel - 4 ohms x 2  
........................................................................................................................................................................................................................  
DAMPING FACTOR >100 @ 8 ohms  
........................................................................................................................................................................................................................  
PEAK CURRENT  
CAD 500 MB - 70 amps  
CAD 200 - 35 amps  
........................................................................................................................................................................................................................  
FREQUENCY RESPONSE  
10 to 50 kHz +/-0.1 dB  
-3 dB @ 200 kHz  
........................................................................................................................................................................................................................  
INPUT POWER REQUIREMENTS 117 VAC 50/60 Hz or 234 VAC 50/60 Hz, by market  
........................................................................................................................................................................................................................  
POWER CONSUMPTION  
255/155/115/90/125 Watts – Idling with no signal input  
2500/1000, All channels, 8-ohm load, full power  
........................................................................................................................................................................................................................  
INPUT IMPEDANCE  
44k ohms - Single-ended RCA inputs  
91k ohms - Balanced XLR inputs  
........................................................................................................................................................................................................................  
OUTPUT IMPEDANCE 4 to 16 ohms rated speaker impedance  
........................................................................................................................................................................................................................  
GAIN 27 dB  
........................................................................................................................................................................................................................  
THD < 0.05 %, 20 Hz-20 kHz  
........................................................................................................................................................................................................................  
NOISE  
> 100 dB below rated output, A-weighted  
6
 
........................................................................................................................................................................................................................  
SENSITIVITY 1.42 Volts for full output  
........................................................................................................................................................................................................................  
POWER SUPPLY CAPACITORS 4 or 2 - 33,000 μFD @ 80 Volts  
........................................................................................................................................................................................................................  
POWER TRANSFORMERS  
........................................................................................................................................................................................................................  
BREAK-IN PERIOD 100 hours of music playing time  
........................................................................................................................................................................................................................  
1 – Toroidal, 200% duty cycle  
FINISH  
Textured black chassis with silver anodized aluminum faceplate  
Standard (black faceplate optional)  
........................................................................................................................................................................................................................  
AC CORD 3 conductor shielded, Detachable  
...................................................................................................................................................................................................  
WEIGHT  
CAD 500 MB – 48 lbs. (21.8 kg.)  
CAD 200 - 45 lbs. (20.5 kg.)  
........................................................................................................................................................................................................................  
DIMENSIONS  
6.25” H x 17.75” W x 14.5” D  
Allow 2” Depth for speaker binding post clearance  
........................................................................................................................................................................................................................  
FEATURES __________________________________________________________  
Front Panel  
........................................................................................................................................................................................................................  
POWER SWITCH  
Main power switch for all channels  
........................................................................................................................................................................................................................  
LED  
Indicates channels operating. The LED’s will not light if the power  
amplifier is in protection mode or if the fuse is blown  
........................................................................................................................................................................................................................  
Rear Apron  
........................................................................................................................................................................................................................  
AC INLET  
........................................................................................................................................................................................................................  
INPUTS XLR or RCA inputs, with input selector switch  
........................................................................................................................................................................................................................  
3-conductor detachable power cord connector  
OUTPUT  
CAD 500 MB - Dual WBT 5-way binding posts  
CAD 200 - 5-way binding posts  
........................................................................................................................................................................................................................  
FUSES  
AC power fuse. Only replace with a 7 AMP SLOW BLOW Fuse @ 250  
VOLT!  
........................................................................................................................................................................................................................  
RCA/XLR SWITCHES Select single-ended or balanced operation for each channel  
........................................................................................................................................................................................................................  
REMOTE TRIGGER  
1/8” mono mini-plug connection jack. Set the front panel Main Power  
switch to OFF for use of either the CAD 500 MB or CAD 200 for the  
remote turn on or turn off feature with the remote trigger controlled by  
an external switch.  
7
 
INSTALLATION _____________________________________________________  
This section describes the unpacking and installation procedures for your new component.  
CAUTION  
EQUIPMENT DAMAGE MAY OCCUR WITH IMPROPER FUSES.  
NEVER REMOVE / INSERT AC LINE CORD WHEN THE UNIT IS ON.  
Unpacking  
All Cary Audio Design shipping containers have been specially designed to protect their contents and  
special care has been taken to prevent damage under normal shipping conditions. Mishandling should be  
evident upon inspection of the shipping container. If shipping damage is found after visual inspection,  
take care not to destroy the evidence. If necessary, document the damage with photographs and contact  
the transport carrier immediately.  
Carefully remove your new component from its packing carton and examine it closely for signs of shipping  
damage. We strongly recommend saving all original packing cartons to protect your amplifier from  
damage should you wish to store it or ship it for after-sales service.  
Warranty Card  
IN THE USA: If you are the original purchaser of a new unit from an AUTHORIZED CARY AUDIO DESIGN  
DEALER, please fill out the enclosed warranty registration card and return it to Cary Audio Design within  
15 days of your purchase. Cary Audio Design also suggests that you keep your original packing cartons in  
case you ever need to ship the unit when moving to a new home. Warranty restrictions apply. Consult the  
warranty section at the end of this manual for details. Please be certain to keep a copy of the original sales  
receipt from your AUTHORIZED CARY AUDIO DESIGN DEALER to validate the warranty if ever needed. The  
warranty is for the original purchaser only and does not transfer to any subsequent owner.  
OUTSIDE THE USA: Your local Authorized Cary Audio Design Distributor will make his own warranty policy  
for your country. Please check with them for the terms of warranty for your new amplifier.  
Placement  
The power amplifier is designed for use inside climate controlled rooms. It must be protected from the  
elements and temperature extremes. For example, avoid placing the unit in extremely hot locations such  
as near radiators or other heating units. Avoid installation where it might be damp or wet to avoid  
potential shock hazards.  
Power Requirements  
Your new power amplifier is designed to operate from residential or commercial AC current mains. The  
design voltage is 117 VAC at 50/60Hz for USA. (Export units 234 VAC at 50/60Hz or 117 VAC at 50/60 Hz.)  
Cables  
The speaker cables from the CAD 500 MB or Cary Cinema power amplifier can be any convenient length  
that your individual speaker set-up requires. Select quality speaker cables of sufficient size to preserve the  
outstanding performance capabilities of your Cary Cinema amplifier. Heavy gauge #14 wire is suitable for  
8
 
distances up to 10 feet, #12 for 25 feet. Most audio dealers will have proper speaker cable in stock for this  
purpose. Consult your Authorized Cary Audio Design Dealer for advice about wire.  
Interconnects  
Signal input connections are made on the rear of your CAD 500 MB or Cary Cinema power amplifier,  
selecting either single ended RCA connections or XLR balanced inputs. The interconnect cables can be any  
convenient length your installation set-up requires. The choice of a high quality shielded interconnect  
cable is important. Once again, your audio dealer will have the proper cables in stock for this purpose.  
WARNING  
Do not touch the speaker output binding posts during normal operation. You may be shocked.  
Do not short-circuit the speaker output binding posts. Damage may occur or the fuse may  
blow. Do not parallel or “bridge” the speaker output binding posts as this will damage the  
amplifier.  
OPERATION ________________________________________________________  
Your new CAD 500 MB or CAD 200 amplifier is ready for operation after installing the AC power cord, the  
speaker and interconnect cables. Make sure that the RCA/XLR switch is in the proper input selector  
position for your particular usage and installation.  
On-Off Power Switch  
Push the main power switch on the front panel to the ON position for normal use. (Set CAD 500 MB, CAD  
200 for remote turn on/off operation and it will be turned on and off by the trigger in the surround sound  
processor.) At this point you can play music or start the movie. Flip the main power switch to OFF for  
normal shut down.  
Break In Period  
The transistors and capacitors take approximately 100 hours of music playing to fully settle in for peak  
performance. The power amplifier will sound good right out of the box and continue to improve as it goes  
through ‘break in.’ After the first couple of hours you will notice increased image depth and tighter bass.  
9
 
SERVICE AND CARE ________________________________________________  
The chassis may be cleaned with a soft towel and Windex® or a similar window cleaner. Spray it on the  
cleaning cloth to moisten it, not on the component. Do not use solvents or harsh chemicals to clean the  
preamplifier. They may remove the labels from the chassis. The frequency and need of cleaning will be  
governed by operating environmental conditions. Avoid letting the component become dusty or wet. A  
‘feather duster’ type cleaner will also work well for cleaning the component.  
Factory Service  
Careful consideration has been given to the design of this product to keep maintenance problems to a  
minimum. If problems arise, refer to the troubleshooting guide at the end of this manual. If the problem is  
not easily solved, we suggest that you contact our Customer Service Department by phone at (919) 355-  
0010, 1–5 pm Eastern Standard Time, to describe your problem in detail. DO NOT return the component  
to the factory without a Return Authorization Number (RA) from the Customer Service Department.  
Cary Audio Design assumes no responsibility if the transportation company refuses to pay a damage claim  
due to your improper packing or lack of insurance should the unit be lost in shipment. We strongly  
suggest using the original packing cartons for shipping any Cary Audio Design component.  
Non-Warranty Repairs  
Cary Audio Design will provide repair service for its products charging on a time and expense basis. At this  
time, the standard non warranty service bench fee is $125 with all parts used for repair charged extra. This  
may change with time and is not a quote for service. Please call us at 919-355-0010 for more information  
about out of warranty service and repair fees.  
WARNINGS  
Make no attempt to put the CAD 500 MB or CAD 200 amplifier in service outside of the  
cabinet - Contact with high voltages found inside the unit can be fatal! Completely remove AC  
power plug from the wall and allow 30 minutes for the high voltage capacitors to discharge  
through bleeder resistors before attempting to clean the inside of the amplifier.  
CAUTIONS  
Never remove/insert the AC plug when the unit is on or the AC power switch is in the “ON”  
position. Obstruction of the top portion of the CAD 500 MB or CAD 200 power amplifier will  
result in overheating.  
10  
 
AWARDS ___________________________________________________________  
The CAD 500 MB and CAD 200 power amplifiers are derived from the CAD 500 T power amplifier that sold  
for $8,000 as a multichannel audiophile power amplifier. We firmly believe that you will enjoy with our  
Cary Classic solid state power amplifiers. Thank you for your support of Cary Audio Design. We suggest  
that a Cary Cinema CD player or Cary Classic preamplifier would be a great match for your Cary Classic  
power amplifier. The CAD SLP 05 balanced vacuum tube preamplifier is an excellent match for the CAD  
500 MB, for example.  
The Cary Cinema 5 power amplifier has been named the Multichannel Power Amplifier of the Year for The  
Perfect Vision magazine in 2003! It was chosen for the prestigious Editor’s Choice Award by The Absolute  
Sound magazine for 2003! Now it is The Perfect Vision and The Absolute Sound magazines Editors Best  
Buy choice for 2004 and has repeated for 2005! With an award-winning amplifier, design like this you can  
rest assured that you have bought the right power amplifier for your home audio system!  
*Any trademarks or award images used remain the property of their respective owners.  
11  
 
TROUBLESHOOTING GUIDE________________________________________  
SYMPTOM  
CAUSE  
REMEDY  
Hum or “Buzzing” through Ground loop  
the speakers  
Install 2-pin adapter on AC  
cord to float the ground  
Intermittent or poor connection Replace interconnect  
of interconnect ground  
RCA/XLR Switch not in correct  
position  
If using balanced inputs, make  
sure switch is toward XLR  
connector and toward RCA jack  
for RCA in  
Reduced Output  
AC fuse blows  
RCA/XLR Switch not in correct  
position  
If using balanced inputs, make  
sure switch is toward XLR  
connector and toward RCA jack  
for RCA in  
Overload  
Playing very loud into very  
low impedance. Replace fuse  
Short at output  
Make sure (+) and (-) of  
binding post are not shorted  
LED out  
Protection circuit activated  
Turn power off. Wait 10  
seconds and turn back on  
12  
 
UNITED STATES LIMITED WARRANTY ______________________________  
Cary Audio Design warrants to the original United States purchaser for use in the United States, that Cary  
Audio Design vacuum tube or solid state power amplifiers, surround sound processors or preamplifiers  
shall be free from defects in parts or workmanship for three (3) years from the date of the original  
purchase. Vacuum tubes, if any are used in the component, are offered a 90 day from purchase date  
exchange policy against defects with the exception of the CAVT 300B vacuum tube which has a (1) one  
year from purchase date exchange policy. Any digital drive design, whether a Cary Audio Design CD or  
SACD player or a Cary Cinema DVD player, has a limited one year parts and labor warranty against defects  
in manufacture. This is a limited warrant, for the original purchaser only and does not transfer to any  
subsequent owner.  
During the limited warranty period, Cary Audio Design or an authorized Cary Audio Design service facility  
will provide free of charge both parts and labor necessary to correct any defects in material or  
workmanship.  
To obtain such warranty service, the original purchaser must:  
1. Complete and send in the warranty Registration Card within 15 days of purchase.  
2. If claiming service the owner must send a fully filled in copy of the original sales receipt along  
with any unit sent in for service showing the AUTHORIZED CARY AUDIO DESIGN DEALER’S  
name, the new selling price, the buyer’s name, e-mail or phone number and address on the  
receipt. Blank receipts will NOT validate the limited warranty for service.  
3. Notify Cary Audio Design as soon as possible after the discovery of a possible defect and  
submit the following information to determine eligibility for warranty:  
(a) The model number and serial number;  
(b) A fully filled in copy of the original sales receipt showing the original selling price,  
purchasers name and address filled in by an AUTHORIZED CARY AUDIO DESIGN DEALER with  
the original date of purchase shown on the form;  
(c) a detailed description of the problem.  
4. Deliver the product to Cary Audio Design or the nearest authorized service facility or ship with  
all freight and insurance charges prepaid, in its original packing container or equivalent, to  
Cary Audio.  
Correct maintenance, repair and use are important to obtain performance from this product. Therefore,  
please carefully read the Operating Manual. This warranty does not apply to any defect that Cary Audio  
Design in its sole discretion determines is due to:  
1. Improper maintenance or repair, including the installation of parts or accessories that do not  
conform to the quality and the specifications of the original parts.  
2. Misuse, abuse, neglect or improper installation.  
3. Accidental or incidental damage.  
WARRANTY DISCLAIMER  
Except for the express warranties stated herein, Cary Audio Design disclaims all other warranties including,  
without limitation, all implied warranties of merchantability and fitness for a particular purpose. The  
13  
 
foregoing constitutes Cary Audio Design’s entire obligation with respect to this product, and the original  
purchaser and any user or owner shall have no other claim for incidental or consequential damages. Some  
states do not allow the exclusion or limitation of incidental or consequential damages, so the above  
limitation and exclusion may not apply to you. This warranty gives legal rights and you may also have  
other rights, which vary from state to state.  
EXCLUSIVE REMEDY  
Notwithstanding the foregoing, the purchaser’s exclusive remedy for any breach of warranty, express or  
implied, is limited to the repair or replacement of the defective unit or the refund of the purchase price, at  
the option of Cary Audio Design. Under no circumstances is Cary Audio Design liable for incidental or  
consequential damages. Any implied warranties imposed by law terminate one (1) year from the date of  
purchase.  
INTERNATIONAL PURCHASERS (Export markets)  
Cary Audio Design warrants its merchandise to purchasers within the United States exclusively for use  
within the United States of America. It provides no other warranties, expressed or implied. If you are living  
outside the USA, please consult with your local dealer or distributor to determine the details of your local  
warranty.  
Cary Audio Design  
1020 Goodworth Drive  
Apex, North Carolina 27539  
Tel: 919-355-0010  
Fax: 919-355-0013  
14  
 
CARY AUDIO DESIGN  
1020 Goodworth Drive, Apex, NC 27539  
phone 919-355-0010  
fax 919-355-0013  
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
 

Best Universal Remote IS23 User Manual
Bosch Appliances Coffeemaker TKN68E75UC User Manual
Bosch Power Tools Router 1617 User Manual
Brother DVR DVR N4 User Manual
Cambridge Audio CD Player 740C User Manual
Canon Camcorder Accessories Sx200 Is User Manual
Caravell Freezer SLC 168 User Manual
Cary Audio Design Stereo Amplifier CAD 280SA User Manual
Casio Laptop HK1223 User Manual
Cerwin Vega Speaker System CVP 118 User Manual