Connecting the Transmitter to an Audio Source
Introduction
1. Plug the stereo plugs on the provided Y-adapter
Y-adapter
AR’s Outdoor Lantern and Wireless Speaker System puts a new twist on your outdoor
lighting: sound! The AW851 eliminates the hardest part of adding speakers to your
home—running and hiding hundreds of feet of speaker wire. The AR Wireless Speaker
System’s RF signal travels with ease through walls, floors, ceilings and other obstacles,
delivering high-quality sound and stylish décor. With drift- and static-free reception
along with outstanding range—up to 150 feet*—the possibilities for enjoying your AR
Wireless Speaker System are nearly unlimited. The AR Wireless Speaker System is
compatible with most audio sources, such as TVs, DVD players, VCRs, A/V receivers/
amps, stereos, computers, and portable devices (CD players, cassette players, MP3s
etc.).
audio cable
audio cable into the AUDIO IN jacks on the back of
the transmitter (make sure to match the colors on
the plugs and jacks).
CHANNEL
DC IN
A
1
2
3
R
AUDIO
IN
L
2. Plug the mini-plug end of the provided Y-adapter
into the headphone output of your MP3 player or CD
player (or audio output jack on your computer).
Transmitter
(back panel)
Audio
source
Outdoor Lantern and
Wireless Speaker
Warning: This product is designed to work with line level outputs or headphone
outputs only. DO NOT connect it directly to speaker outputs as it will permanently
damage the transmitter.
This manual covers various connection options and detailed operating instructions for
making the AR Wireless Speaker System a valued part of your lifestyle. If, after having
reviewed the instructions, you have any questions, please call toll-free
3. Connect the small, round plug from the transmitter
Transmitter (back panel)
AC power adapter to the transmitter’s DC IN jack.
Model AW851
120V AC
wall outlet
Plug the other end of the transmitter AC power
AC Power
Adapter
adapter into any standard 120V AC wall outlet.
*Range may vary according to environment.
CHANNEL
DC IN
1
2
3
R
AUDIO
IN
L
Setting Up
Note: This power unit is intended to be correctly oriented in a vertical or floor
mount position.
Unpacking
Note: There is no transmitter ON/OFF switch. The transmitter is designed to be
left plugged in and powered at all times. If you will not be using the AW851 for an
extended period of time, unplug the transmitter AC power adapter.
Before you start installing the Outdoor Lantern and Wireless Speaker, make sure you
have the following parts in your package:
Installation and
Operation Manual
(2) Wire
Connectors
Connecting to an A/V Receiver
You can also connect the transmitter to an A/V Receiver using the mini-jack to
RCA adapter included.
(1) Transmitter
(2) Mounting
Screws
1. Plug the stereo plugs on the provided Y-adapter audio cable into the AUDIO
IN jacks on the back of the transmitter (make sure to match the colors on the
plugs and jacks).
(2) Caps
Important Information
2. Plug the mini-plug end of the provided
Transmitter
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
Y-adapter into the mini-jack to RCA adapter.
(back panel)
A/V Receiver
Caution: To reduce the risk of electric shock, do not remove cover (or back). No user
serviceable parts inside. Refer servicing to qualified service personnel.
(1) Transmitter
Power Adapter
CHANNEL
DC IN
Audio Output
(1) Mounting Crossbar
1
2
3
3. Connect the stereo plugs on the mini-jack to
RCA adapter to the corresponding left and
right audio outputs of your A/V receiver,
amp, or other audio source.
R
AUDIO
IN
L
Y-adapter
audio cable
Mini-jack to
RCA adapter
The exclamation point within an equilateral
triangle is intended to alert the user of the
presence of important operating and maintenance
(servicing) instructions in the literature accompanying the
appliance.
The Lightning flash with arrowhead symbol, with
an equilateral triangle is intended to alert the user
of the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
(1) mini-jack to
RCA adapter
(1) 3.5mm to
RCA Cable
(1) Lantern/Wireless Speaker
For power rating and all applicable warning labels, see the bottom and the side of the transmitter and receiver/speaker.
8. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
Important Safety Instructions
1. Read these instructions.
Mounting the Lantern/Wireless Speaker
Installing/Changing the Lantern Light Bulb
point where they exit from the apparatus.
2. Keep these instructions.
9. Unplug this apparatus during lightning storms or when
3. Heed all warnings.
Before you can use the Outdoor Lantern and Wireless Speaker, you must mount it to
an outlet box.
The Outdoor Lantern and Wireless Speaker takes a candelabra-base bulb (40W max;
bulb not included). The bottom of this Outdoor Lantern and Wireless Speaker is open
for easy access to the socket. For best results, use a clear (non-frosted) 40W bulb. To
install or change the lantern’s bulb:
unused for long periods of time.
4. Follow all instructions.
10. Refer all servicing to qualified service personnel. Servicing
5. Clean only with dry cloth.
is required when the apparatus has been damaged in any
6. Do not block any ventilation openings. Install in
way, such as power-supply cord or plug is damaged, liquid
accordance with the manufacturer’s instructions.
WARNING: Consult a qualified electrician in case the main supply wiring needs to be
checked or if you’re not certain how to install wiring. Always install wiring connections
in accordance with local code, ordinances, and the National Electrical Code.
has been spilled or objects have fallen into the apparatus,
7. Do not install near any heat sources such as radiators,
the apparatus has been exposed to rain or moisture, does
heat registers, stoves, or other apparatus (including
not operate normally, or has been dropped.
amplifiers) that produce heat.
11. Only use attachments/accessories specified by the
manufacturer.
1. Find the light socket located on the bottom of
the lantern.
Bottom of the Lantern
Care and Maintenance
1. Make sure power is off for the outlet box at the main
circuit breaker.
• Always use a soft cloth to clean the speaker and
2. Insert the bulb and screw it into the socket.
transmitter. Never use any product containing alcohol or
other solvents as they may damage the surface.
• Use caution when plugging the power transformer in an
AC outlet to avoid the risk of electric shock.
• To clean the lantern/speaker: Shut off main power supply.
Wipe with damp cloth or use window cleaner. Do not use
abrasive cleaners.
• Bulb replacement: Replace with MAX 40W type B or
Listed 13W Self-Ballasted Compact Fluorescent Lamp
(candelabra-based bulb).
Product Information
Keep your sales receipt to obtain warranty parts and
service and for proof of purchase. Attach it here and
record the serial and model numbers in case you need
them. These numbers are located on the product.
2. Remove the old fixture from the outlet box. Carefully
disconnect its wiring.
Important: Handle and dispose of fluorescent
bulbs per manufacturer’s directions.
Model No.: ______________________________________
Purchase Date: __________________________________
Dealer/Address/Phone: ___________________________
Warning: Do not use bulb-base adapters with this product.
This product must be used with candelabra-based bulbs only.
3. Mount the crossbar to the outlet box using the mounting
Level
screws included in this package.
WARNING: RISK OF INJURY
• Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
• Account for small parts and destroy packing material, as these may be hazardous to children.
• Use flashlight or alternate light source to light work area during installation.
• Assistance may be required to support fixture during installation.
• This apparatus must be installed in accordance with all applicable installation rules.
4. Unscrew the center screw on the crossbar and align the
two side screws so that they are level with each other. Then
tighten the center screw.
Light socket
• This device must be connected to a mains socket outlet or outlet box with a grounded and protected connection.
• To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.
CAUTION: WIRING AND FIXTURE OPERATION
• Connect fixture to supply wires rated for at least 90°C (194°F).
• Do not use fixture on dimming circuits.
5. Find the copper ground wire coming from the wireless
speaker. Twist it together with the ground wire coming from
the outlet box.
Tour of the Speaker System
• Unit must be mounted higher than 60”.
WARNING
Lantern/Speaker
To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.
If the outlet box doesn’t have a ground wire, attach the
ground wire to the mounting crossbar as shown here.
Ground
Right Panel Speaker Controls
Speaker On/Off button turns the speaker on and off
Speaker
On/Off
6. Strip 3/4” of insulation from the wire ends coming from
the speaker. Use pliers to twist the speaker’s stripped ends
together with the wires coming from the outlet box—make
sure you match black wire to black and white wire to white.
Then snip the ends.
wire
Auto Scan button rescans for the transmitter’s signal
Auto Scan
Volume Up and Down buttons adjust the volume level
Recommended
Installation Location
Install your outdoor lantern and
Volume
L/Mono/R switch determines if the speaker plays sound in mono
as a stand-alone speaker, or plays the left or right track in a
Volume
wireless speaker under eaves that
extend at least 1 meter (3ft 11in)
3ft 11in
(1 meter)
stereo pair with an additional AW851
7. Attach the wire connectors to the joined ends. If you’d like,
you can tie the connectors and ends together with electrical
tape.
from your house and are at least
L
Mono
R
Light On/Off switch turns the lantern on and off
3 meters (9ft 10in) off the ground.
Then make sure the bottom of the
2ft 6in
(.75 meter)
outdoor lantern and wireless speaker
is at least 1.8 meters (5ft 6in) off the
ground.
Front Panel
Power/Linked indicator (not shown) blinks when the speaker is
first powered on; it turns solid blue when the speaker is tuned to
the transmitter
Light
On/Off
The outdoor lantern and wireless
speaker must be mounted to a wall
made of wood or concrete.
8. Place the wireless speaker onto the two side screws on the
crossbar. Secure the speaker onto the wall with the two caps
included in this package.
Right Side, Back
9. Use silicon caulking to seal the top and sides between
the speaker and the wall. Leave the bottom open so that
moisture can drain.
|