Acoustic Research Headphones ARE05 User Manual

Inserting your earphones  
Choosing and changing sleeves  
Connecting to your audio device  
Welcome!  
Experiment with the different sizes and materials in this package to  
find the right sleeves for you. Changing the sleeves is easy.  
1. Turn the volume of your audio device all the way down.  
Individual AR earphones are designed  
Congratulations on your purchase of the ARE05 Noise-Isolating  
Earphones. These earphones give you detailed, accurate sound  
across the full frequency range while isolating outside noise  
naturally with a custom-fitting in-ear design.  
specifically for either the left or right side.  
Make sure you find the left (L) or right (R)  
marking on the inside of each earphone so  
you know which side is which.  
2. Plug the earphone mini-plug into the headphone jack on  
your audio device.  
1. To remove the sleeve on the  
earphone, pull gently on one sides  
of the sleeve at the base of the stem  
until the sleeve comes off.  
L
Left  
marking  
3. Put on your earphones.  
4. Turn up the audio device volume slowly.  
What’s in the package?  
Before you get started with these earphones, take a moment to get  
familiar with the package contents.  
2. Position the replacement sleeve at  
a slight downward angle over the  
earphone stem. Gently push the  
sleeve up and onto the stem until it  
fits securely in place.  
Listen safely!  
Make sure the sleeves cover the end of the  
earphone stems.  
sleeve  
stem  
Enjoy your earphones at a safe volume. Avoid or limit the amount  
of time you listen at higher volumes—permanent hearing loss  
may occur if the earphones are used at too high a volume. If you  
experience a ringing in your ears, or your own voice and other  
sounds seem muffled, stop using the earphones and consult a  
hearing professional.  
Noise-isolating earphones  
3 silicone earbud sleeves (Small, Medium and Large)  
3 foam earbud sleeves (Small, Medium and Large)  
Carrying case  
3. Push the end of the sleeve gently to make sure it covers the  
stem completely.  
User’s guide  
Finally, gently insert your earphones in each ear, just far enough that  
they fit securely—do not push beyond the ear canal opening!  
Important: Do not use these earphones when operating a motor vehicle or  
in any environment where the inability to hear outside sounds may present  
a danger to you or to others. Sounds that you usually rely on as reminders  
or warnings may seem unfamiliar when using earphones. If you plan to use  
earphones around sounds like these, make sure you know how to recognize  
the sounds with your earphones on.  
Which material is right for you?  
Foam sleeves eventually adjust to the contours of your ear,  
giving you the tightest fit and most noise isolation.  
Note: Once you’ve put on your earphones, use the cord adjuster to increase  
or decrease the amount of slack in the cord.  
These earphones come with the medium sized silicone sleeves  
installed. If these don’t fit the way you want them to, try a different  
size or material—the next section tells you how to change sleeves.  
Silicone sleeves are easier to clean and generally more  
comfortable for activities like exercise.  
 

Acoustic Research Universal Remote ARRE433B User Manual
Acu Rite Weather Radio 06017RM User Manual
Advanced Wireless Solutions Portable Radio TK 2180 3180 User Manual
Advantech Network Card ADAM 4000 User Manual
AEG Refrigerator C 8 16 41 I User Manual
Agilent Technologies Laptop FS2331 User Manual
AKG Acoustics Music Mixer AS 4+3 User Manual
Altinex Car Amplifier DA103 107 User Manual
Atlona TV Converter Box AT 3GSDI HD User Manual
Axor Plumbing Product 06400XX0 User Manual