Abocom Network Card M73 APO08 420 User Manual

USB

10/100M

FAST ETHERNET

Quick Installation Guide

M73-APO08-420

Download from Www.Somanuals.com. All Manuals Search And Download

INTRODUCTIONS

The USB 10/100M Fast Ethernet Adapter

provides outside-the-box plug-and-play local

area network connections for USB-enabled PCs,

notebooks and laptops. This adapter uses a B

type USB port to connect with the USB host, and

an RJ-45 port to connect with a 10/100 Fast

Ethernet LAN link. Installation is easy and no

external power is required! The network sharing

is easier than ever.

Specifications

Network standard

ꢀ

IEEE 802.3 for 10BaseT

IEEE 802.3u for 100BaseTX

Data Rate

ꢀ

10/100 Mbps¹

Double data transfer rate in full duplex

mode

Supported operating systems

Windows 98/2000/ME/XP

Physical

ꢀ

Ports: 1 RJ-45, 1 USB B-Type

LED indicators: Link, Transmit/Receive

Dimensions: 2.7”x 2” x 1” (LxWxH)

¹CAT5 cable is required for 100M data transfer rate

- 1 -

Download from Www.Somanuals.com. All Manuals Search And Download

Parts Names and Functions

ꢁUSB Connection Cable: connects the USB

host port to the USB 10/100M Fast Ethernet

Adapter.

connects to the USB host port

ꢂUSB-B Port: USB device port.

ꢃUSB Fast Ethernet Adapter

ꢄRx/Tx LED indicator: blinks green when the

Fast

Ethernet

Adapter

transmitting/receiving data.

ꢅLink LED indicator: glows green when

100M Network is linked; when glows amber,

then 10M Network is linked.

ꢆNetwork Port: connects the Fast Ethernet

Adapter to the HUB with the LAN cable.

- 2 -

Download from Www.Somanuals.com. All Manuals Search And Download

HARDWARE INSTALLATION

Precaution

Before the installation, make sure the USB port

exists in your computer and is enabled. To check

this,

ComputerꢇControl

PanelꢇSystem. Open the Device Manager tab.

If the Universal Serial Bus controller device is

found, it means your USB port is installed and

enabled. If not, either no USB port is installed or

the USB bios is not properly enabled. In this

case, consult your computer dealer for USB

support.

Getting Hooked Up

1. Locate the USB host port of your system.

Align the USB connector toward the USB host

port, push evenly and steadily until it is seated.

- 3 -

Download from Www.Somanuals.com. All Manuals Search And Download

2. Connect another end of the USB connection

cable to the device port (USB B) of your USB

10/100M Fast Ethernet Adapter until it clicks.

3. Connect the UTP cable to the Fast Ethernet

Adapter.

4. Connect the other end to a Hub.

- 4 -

Download from Www.Somanuals.com. All Manuals Search And Download

SOFTWARE INSTALLATION

Installation for Windows 98

Once the device is properly connected to

your computer, Windows 98 will

automatically detect the new hardware

device. Perform the following procedures

for installing the device driver.

Insert the device driver disk into your

floppy drive. When the above figure

appears, click Next.

- 5 -

Download from Www.Somanuals.com. All Manuals Search And Download

The installation program will proceed

automatically. Follow the on-screen

instruction to finish.

When Windows prompts you to restart

your computer, click No to make some

changes to your network settings.

- 6 -

Download from Www.Somanuals.com. All Manuals Search And Download

Go to Start ꢇSettings ꢇControl Panel.

Double-click Network.

When the Network dialog box appears,

select USB 10/100M Fast Ethernet and

click Add. Set the appropriate protocols

and client for you needs. When completed,

click OK.

Remember to restart your computer to

activate the new device

Setup Diagnostics

To verify if the device exists in your computer

and is enabled, go to Start ꢇ Settings ꢇ

Control Panel ꢇSystem. Click the Device

Manager tab. If the 10/100 USB Network

- 7 -

Download from Www.Somanuals.com. All Manuals Search And Download

Adapter is found, it means that your device is

properly installed and enabled.

Installation for Windows 2000

1. Once the device is well connected to your

computer, Windows 2000 will automatically

detect the new device. Click Next to

proceed.

- 8 -

Download from Www.Somanuals.com. All Manuals Search And Download

2. Select Search for a suitable driver for my

device (recommended) and click Next.

3. Insert the new device driver to the disk drive.

Select Floppy disk drives. Click Next.

4. Click Next. Windows will copy all the

necessary files to your system.

5. Click Yes to continue.

6. Click Finish to complete the software

installation.

- 9 -

Download from Www.Somanuals.com. All Manuals Search And Download

7. Go to Start ꢇSettings ꢇControl Panel

ꢇ Network and Dial-up Connections.

Double-click Local Area Connections.

8. When the Network dialog box appears,

select USB 10/100 Network Adapter and

click Install. Set the appropriate protocols

and client for you needs. When completed,

click OK.

- 10 -

Download from Www.Somanuals.com. All Manuals Search And Download

9. Remember to restart your computer to

activate the new device.

Setup Diagnostics

To verify if the device exists in your computer

and is enabled, go to Start ꢇ Settings ꢇ

Control Panel ꢇSystem ꢇHardware. Click

the Device Manager tab. If the USB 10/100

Network Adapter is found, it means that your

device is properly installed and enabled.

Installation for Windows ME

1. Once the device is well connected to your

computer, Windows ME will automatically

detect the new device. Select Specify the

location of the driver (Advanced) and

click Next.

Insert the device driver disk into the floppy

disk drive on your system. Select

Removable Media (Floppy, CD-ROM…)

and click Next to continue.

- 11 -

Download from Www.Somanuals.com. All Manuals Search And Download

Click Next to continue.

Click Next. Windows will copy all the

necessary files to your system.

- 12 -

Download from Www.Somanuals.com. All Manuals Search And Download

Click Finish to complete the software

installation.

6. When asked if you want to restart your

computer, click No to continue the

Network configuration.

Go to Start ꢇSettings ꢇControl Panel.

Double-click Network.

When the Network dialog box appears,

select USB 10/100 Network Adapter and

- 13 -

Download from Www.Somanuals.com. All Manuals Search And Download

click Add. Set the appropriate protocols

and client for you needs. When completed,

click OK.

Remember to restart your computer to

activate the new device.

Setup Diagnostics

To verify if the device exists in your computer

and is enabled, go to Start ꢇ Settings ꢇ

Control Panel ꢇSystem. Click the Device

Manager tab. If the USB 10/100 Network

Adapter is found, it means that your device is

properly installed and enabled.

Installation for Windows XP

Once the device is well connected,

Windows will detect the new device and

prompt you to insert the network device

driver. Click Install from a list or

specific location… and click next.

- 14 -

Download from Www.Somanuals.com. All Manuals Search And Download

Insert the device Driver Disk into the

floppy disk drive of your system. Select

Search removable media (floppy, CD-

ROM…) and click Next.

Click Next to continue.

- 15 -

Download from Www.Somanuals.com. All Manuals Search And Download

Windows will start searching for the

appropriate driver for the installation.

When the screen appears as below, click

Continue Anyway to proceed.

Wait for seconds while Windows copies

the appropriate driver to your system.

Click Finish. The software installation for

this network device is now completed.

- 16 -

Download from Www.Somanuals.com. All Manuals Search And Download

Go to Start ꢇSettings ꢇControl Panel

ꢇNetwork and Dial-up Connections.

Double-click Local Area Connections.

When the Network dialog box appears,

select USB 10/100 Network Adapter and

- 17 -

Download from Www.Somanuals.com. All Manuals Search And Download

click Install. Set the appropriate protocols

and client for you needs. When completed,

click OK.

Remember to restart your computer to

activate the new device.

Setup Diagnostics

To verify if the device exists in your computer

and is enabled, go to Start ꢇControl Panel ꢇ

System. Click the Device Manager tab. If the

USB 10/100 Network Adapter is found, it

means that your device is properly installed and

enabled.

- 18 -

Download from Www.Somanuals.com. All Manuals Search And Download

Abocom Switch HF1000 User Manual
ADC Cassette Player RMG User Manual
ADC Network Card UltraWAVE CDMA Pico BS Plus User Manual
Agilent Technologies Portable Generator E4438C User Manual
Aiwa CRT Television TV F2000u TV F2400u User Manual
Alto Shaam Oven 12 20 RTM User Manual
Athena Technologies Speaker AS 1C6 User Manual
Azden Microcassette Recorder WHDPRO User Manual
Behringer DJ Equipment B312A User Manual
Beko Oven GM 15120 DA PR User Manual